u-boot.git/cpu/arm920t, branch v2009.08-rc2

rm9200 lowevel_init: don't touch reserved/readonly registers

2009-08-03T07:26:26Z

For some reason the AT91rm9200 lowlevel init writes to a bunch of reserved or read-only addresses. All the boards seem to define the value-to-be-written values as zero ... but they shouldn't actually be writing *anything* there. No documented erratum justifies these accesses. It looks like maybe some pre-release BDI-2000 setup code has been carried along by cargo cult programming since at least late 2004 (per GIT history). Here's a patch disabling what seems to be bogosity. Tested on a csb337; there were no behavioral changes. Signed-off-by: David Brownell on RM9200ek Tested-by: Jean-Christophe PLAGNIOL-VILLARD

cpu/arm920t/start.S: include to have ROUND() defined

2009-07-27T08:06:39Z

Commit fcd3c87e made include/common.h usable by assembler code but failed to update cpu/arm920t/start.S Signed-off-by: Wolfgang Denk

rm9200 ethernet driver: board-specific quirk (csb337)

2009-07-23T05:39:23Z

CSB337 boards originally shipped with MicroMonitor, not U-Boot; and with a version using a different convention for recording Ethernet addresses than anyone else. To avoid breaking Linux when it uses U-Boot, have it use the same convention on that hardware. Signed-off-by: David Brownell Signed-off-by: Ben Warren

S3C24x0: extract interrupts from timer

2009-07-06T19:52:35Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

arm920t/interrupts: Move conditional compilation to Makefile

2009-07-06T19:52:30Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

arm: remove cpu_init

2009-06-12T18:39:52Z

move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

arm: unify interrupt init

2009-06-12T18:39:52Z

all arm init the IRQ stack the same way so unify it in lib_arm/interrupts.c and then call arch specific interrupt init Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

arm: unify linker script

2009-06-12T18:39:52Z

all arm boards except a few use the same cpu linker script so move it to cpu/$(CPU) that could be overwrite in following order SOC BOARD via the corresponding config.mk Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

arm920/926/926: remove non needed header

2009-06-12T18:39:49Z

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

arm: timer and interrupt init rework

2009-06-12T18:39:48Z

actually the timer init use the interrupt_init as init callback which make the interrupt and timer implementation difficult to follow so now rename it as int timer_init(void) and use interrupt_init for interrupt btw also remane the corresponding file to the functionnality implemented as ixp arch implement two timer - one based on interrupt - so all the timer related code is moved to timer.c Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD