u-boot.git/cpu/arm926ejs/at91, branch v2009.08Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/cpu/arm926ejs/at91?h=v2009.082009-08-01T09:45:05ZAdd AT91SAM9260 to at91's lowlevel_init.S2009-08-01T09:45:05ZEric Benarderic@eukrea.com2009-07-18T21:45:15Zurn:sha1:3c448e648221879ae0e030e94508b4f9f63b7ab8
Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260.
Signed-off-by: Eric Benard <eric@eukrea.com>
at91: Introduction of at91sam9g10 SOC.2009-07-12T15:56:11ZSedji Gaouaousedji.gaouaou@atmel.com2009-06-25T15:04:15Zurn:sha1:5ccc2d99d61c81805348b0cd9f79731b271f7daf
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
at91: Introduction of at91sam9g45 SOC.2009-07-12T15:43:34ZSedji Gaouaousedji.gaouaou@atmel.com2009-07-09T08:16:29Zurn:sha1:22ee647380c42f44528f99b7c1b423725e542102
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.
The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
at91: Add CAN init function2009-07-06T19:52:43ZDaniel GorsulowskiDaniel.Gorsulowski@esd.eu2009-06-30T21:03:33Zurn:sha1:45627fce18139a74e0755124d27376b520db156c
To enable CAN init, CONFIG_CAN has to be defined in the board config file
and at91_can_hw_init() has to be called in the board specific code.
CAN is available on AT91SAM9263 and AT91CAP9 SoC.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
at91: unify nor boot support2009-06-21T14:18:12ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-06-13T10:50:04Zurn:sha1:8096c51fd4e611ed666dbe77767e81af5d94fc7b
the lowlevel init sequence is the same so unify it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
at91: move cpu info print to cpu2009-06-12T18:45:46ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-31T12:53:18Zurn:sha1:b2403589b4d9996394bafc73eca3623f43ac2c31
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
at91: extract reset from timer2009-06-12T18:39:53ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-31T10:44:45Zurn:sha1:5bb59b3c906ee01adfaac9565443e5236a793079
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
arm: unify linker script2009-06-12T18:39:52ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-08T18:24:12Zurn:sha1:10a451cd57cffbca875c97bbd8929059c5627ec6
all arm boards except a few use the same cpu linker script
so move it to cpu/$(CPU)
that could be overwrite in following order
SOC
BOARD
via the corresponding config.mk
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
afeb9260: fix macb device init2009-06-12T18:39:52ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-16T08:02:05Zurn:sha1:9475c63c7855edd863c93a9bb0f4b8e240d9d212
uses PA10, PA11 for ETX2 and ETX3.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
at91: regroup IP hw init in one file per soc2009-06-12T18:39:51ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-13T19:01:13Zurn:sha1:1699da6297b8c22da16cf85b3c79192f1a6d70ca
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>