u-boot.git/cpu/arm926ejs/at91, branch v2009.11Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/cpu/arm926ejs/at91?h=v2009.112009-10-13T11:17:35ZAdd support for Eukrea CPU9260/CPU9G20 SBC2009-10-13T11:17:35ZTom RixTom.Rix@windriver.com2009-09-27T16:10:09Zurn:sha1:23b80982a02a43bf4ead91574c9d6f1b647ccc8f
these boards are built around Atmel's AT91SAM9260/9G20 and have
up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND
and include a 10/100 Ethernet PHY in RMII mode.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Add support for the Calao SBC35-A9G20 board2009-09-01T20:13:37ZAlbin Tonnerrealbin.tonnerre@free-electrons.com2009-08-24T16:03:26Zurn:sha1:9453967e28c5e3abbf856f95735ea69bae1e77fa
The Calao SBC35-A9G20 board is manufactured and sold by Calao Systems
<http://www.calao-systems.com>. It is built around an AT91SAM9G20 ARM SoC
running at 400MHz. It features an Ethernet port, an SPI RTC backed by an onboard
battery , an SD/MMC slot, a CompactFlash slot, 64Mo of SDRAM, 256Mo of NAND
flash, two USB host ports, and an USB device port. More informations can be
found at <http://www.calao-systems.com/articles.php?lng=en&pg=5936>
Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
Add AT91SAM9260 to at91's lowlevel_init.S2009-08-01T09:45:05ZEric Benarderic@eukrea.com2009-07-18T21:45:15Zurn:sha1:3c448e648221879ae0e030e94508b4f9f63b7ab8
Needed for AT91SAM9260 NOR Boot on Eukrea's CPU9260.
Signed-off-by: Eric Benard <eric@eukrea.com>
at91: Introduction of at91sam9g10 SOC.2009-07-12T15:56:11ZSedji Gaouaousedji.gaouaou@atmel.com2009-06-25T15:04:15Zurn:sha1:5ccc2d99d61c81805348b0cd9f79731b271f7daf
AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
at91: Introduction of at91sam9g45 SOC.2009-07-12T15:43:34ZSedji Gaouaousedji.gaouaou@atmel.com2009-07-09T08:16:29Zurn:sha1:22ee647380c42f44528f99b7c1b423725e542102
AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz.
It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of
peripherals.
The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES.
On the board you can find 2 USART, USB high speed,
a 480*272 LG lcd, ethernet, gpio/joystick/buttons.
Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
at91: Add CAN init function2009-07-06T19:52:43ZDaniel GorsulowskiDaniel.Gorsulowski@esd.eu2009-06-30T21:03:33Zurn:sha1:45627fce18139a74e0755124d27376b520db156c
To enable CAN init, CONFIG_CAN has to be defined in the board config file
and at91_can_hw_init() has to be called in the board specific code.
CAN is available on AT91SAM9263 and AT91CAP9 SoC.
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
at91: unify nor boot support2009-06-21T14:18:12ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-06-13T10:50:04Zurn:sha1:8096c51fd4e611ed666dbe77767e81af5d94fc7b
the lowlevel init sequence is the same so unify it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
at91: move cpu info print to cpu2009-06-12T18:45:46ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-31T12:53:18Zurn:sha1:b2403589b4d9996394bafc73eca3623f43ac2c31
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
at91: extract reset from timer2009-06-12T18:39:53ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-31T10:44:45Zurn:sha1:5bb59b3c906ee01adfaac9565443e5236a793079
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
arm: unify linker script2009-06-12T18:39:52ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-08T18:24:12Zurn:sha1:10a451cd57cffbca875c97bbd8929059c5627ec6
all arm boards except a few use the same cpu linker script
so move it to cpu/$(CPU)
that could be overwrite in following order
SOC
BOARD
via the corresponding config.mk
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>