u-boot.git/cpu/arm926ejs/davinci/Makefile, branch main

arm: Move cpu/$CPU to arch/arm/cpu/$CPU

2010-04-13T07:13:24Z

Signed-off-by: Peter Tyser

TI DaVinci: DM646x: Initial Support for DM646x SOC

2009-10-13T11:17:34Z

DM646x is an SOC from TI which has both an ARM and a DSP. There are multiple variants of the SOC mainly dealing with different core speeds. This patch adds the initial framework for the DM646x SOC. Signed-off-by: Sandeep Paulraj

ARM: DaVinci: DaVinci DM365 SOC specific code

2009-09-05T11:48:07Z

This patch adds support for DaVinci DM365 SOC. Signed-off-by: Sandeep Paulraj

Moved Davinci Ethernet driver to drivers/net

2009-06-15T07:13:54Z

This driver has been renamed davinci_emac.c Signed-off-by: Ben Warren

davinci: display correct clock info

2009-06-12T18:39:49Z

Move the clock-rate dumping code into the cpu/.../davinci area where it should have been, enabled by CONFIG_DISPLAY_CPUINFO, updating the format and showing the DSP clock (where relevant). Switch boards to use the cpuinfo() hook for this stuff. Remove a few now-obsolete PLL #defines. Signed-off-by: David Brownell

davinci: add basic dm355/dm350/dm335 support

2009-06-12T18:39:48Z

Add some basic declarations for DaVinci DM355/DM350/DM335 support, keyed on CONFIG_SOC_DM355. (DM35X isn't quite right because the DM357 is very different; while the DM355 is like a DM355 without the MPEG/JPEG coprocessor). These have different peripherals than the DM6446, and some of the peripherals are at different addresses. Notably for U-Boot, there's no EMAC, and the NAND controller address is different Signed-off-by: David Brownell

davinci: split out some dm644x-specific bits from psc

2009-06-12T18:39:48Z

Split out DaVinci DM6446-specific bits from more generic bits: - Add a CONFIG_SOC_DM644X. All current boards use DM6446 chips; DM6443 and DM6441 chips differ in available peripherals. - Move most DM644X-specific bits from psc.c to a new dm644x.c file, which is conditionally built. It provides device-specific setup. Plus minor coding style and comment updates with respect to the PSC. Signed-off-by: David Brownell

davinci: cpu-specific build uses conditional make syntax

2009-06-12T18:39:47Z

Update cpu/arm926ejs/davinci/Makefile to use COBJ-y type syntax. Add the first conditional: for EMAC driver support. Not all chips have an EMAC; and boards might not use it, anyway. This doesn't touch PHY configuration; that should eventually become conditional too. Signed-off-by: David Brownell

davinci: move psc support board-->cpu

2009-06-12T18:39:47Z

Move DaVinci PSC support from board/* to cpu/* where it belongs. The PSC module manages clocks and resets for all DaVinci-family SoCs, and isn't at all board-specific. Signed-off-by: David Brownell

DaVinci now respects SKIP_LOWLEVEL_INIT

2009-06-12T18:39:47Z

Don't needlessly include lowlevel init code; that's only really needed with boot-from NOR (not boot-from-NAND). The 2nd stage loader (UBL) handles that before it loads U-Boot. Signed-off-by: David Brownell