u-boot.git/cpu/arm926ejs, branch v1.3.0

Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.

2007-08-12T12:27:39+00:00

Signed-off-by: Wolfgang Denk

Conding style cleanup

2007-08-10T18:34:58+00:00

Signed-off-by: Stefan Roese

[ARM] TI DaVinci support, hopefully final

2007-08-10T18:26:18+00:00

Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn 
Acked-by: Dirk Behme 
Acked-by: Zach Sadecki 
Acked-by: Stefan Roese

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-08T23:02:05+00:00

Based on patch by Mike Frysinger, 20 Jun 2006

Add support for a saving build objects in a separate directory.

2006-09-01T17:49:50+00:00

Modifications are based on the linux kernel approach and
support two use cases:

  1) Add O= to the make command line
  'make O=/tmp/build all'

  2) Set environement variable BUILD_DIR to point to the desired location
  'export BUILD_DIR=/tmp/build'
  'make'

The second approach can also be used with a MAKEALL script
'export BUILD_DIR=/tmp/build'
'./MAKEALL'

Command line 'O=' setting overrides BUILD_DIR environent variable.

When none of the above methods is used the local build is performed and
the object files are placed in the source directory.

Minor cleanup.

2006-05-10T15:43:20+00:00

Update omap5912osk board support

2006-05-10T08:55:16+00:00

  - Fix OMAP support that omap5912osk compiles in current source tree
  - Update with code from "http://omap.spectrumdigital.com/osk5912"
    to fix problems with DDR initialization
  - Fix timer setup
  - Use CFI flash driver and support complete 32MB of onboard flash
  - Add "print_cpuinfo()" and "checkboard()" functions to display
    CPU (with frequency) and Board infos
Patch by Stefan Roese, 10 May 2006

GCC-4.x fixes: clean up global data pointer initialization for all boards.

2006-03-31T16:32:53+00:00

Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific timer and

2006-03-13T11:37:35+00:00

cpu_reset code from cpu/$(CPU) into the new cpu/$(CPU)/$(SOC) directories
Patch by Andreas Engel, 13 Mar 2006

Update make target for ARM supported boards.

2005-10-06T15:08:18+00:00

Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005