u-boot.git/cpu/arm926ejs, branch v1.3.3

Fix @ -> substitution

2008-05-09T22:30:22+00:00

When applying the AT91CAP9 patches upstream, something transformed
the '@' character into the '  ' sequence.

The patch below restores the original form in all the places where
it has been modified (the AT91CAP9 files, the AT91SAM9260 files which
were copied from AT91CAP9, and a couple of other files where the
'  ' sequence was present).

Signed-off-by: Stelian Pop

ARM: Davinci: Fix DM644x timer overflow handling and cleanup

2008-04-22T21:12:01+00:00

Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code.

Changes:

- Remove *_masked() functions as noted by Wolfgang

- Adapt register naming to recent TI spec (sprue26, March 2007)

- Fix reset_timer() handling

- As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this.

[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179

- Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV).

Many thanks to Troy Kisky  and Pieter Voorthuijsen  for the hints & testing!

Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware.

Signed-off-by: Dirk Behme 
Acked-by: Pieter Voorthuijsen

Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18:

2008-04-11T13:11:26+00:00

Reverting became necessary after it turned out that the patches in
the u-boot-arm repo were modified, and in some cases corrupted.

This reverts the following commits:

	066bebd6353e33af3adefc3404560871699e9961
	7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6
	c88ae20580b2b01487b4cdcc8b2a113f551aee36
	a147e56f03871bba4f05058d5e04ce7deb010b04
	d6674e0e2a6a1f033945f78838566210d3f28c95
	8c8463cce44d849e37744749b32d38e1dfb12e50
	c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d
	8bf69d81782619187933a605f1a95ee1d069478d
	8c16cb0d3b971f46fbe77c072664c0f2dcd4471d
	a574a73852a527779234e73e17e7597fd8128882
	1377b5583a48021d983e1fd565f7d40c89e84d63
	1704dc20917b4f71e373e2c888497ee666d40380

Signed-off-by: Wolfgang Denk

Merge branch 'master' of git://www.denx.de/git/u-boot-at91

2008-04-07T22:16:36+00:00

AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile

2008-03-31T23:46:12+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Port AT91CAP9 to the new headers

2008-03-31T23:45:50+00:00

Adapt the existing AT91CAP9 code to the new headers and APIs.

Signed-off-by: Stelian Pop

Move at91cap9 specific files to at91sam9 directory

2008-03-31T23:44:18+00:00

AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a
common infrastructure can be used. Let this infrastructure be
named after the AT91SAM9 family, and move the existing AT91CAP9
files to the new place.

Signed-off-by: Stelian Pop

Use timer_init() instead of board supplied interrupt_init()

2008-03-31T23:44:05+00:00

The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by
the board, so use timer_init() instead of interrupt_init().

Signed-off-by: Stelian Pop

Removes all board specific code from the arch. part for DM644x (DaVinci) boards

2008-03-30T10:11:34+00:00

Signed-off-by: Pieter Voorthuijsen

- Remove *_masked() functions as noted by Wolfgang

2008-03-30T10:09:01+00:00

- Adapt register naming to recent TI spec (sprue26, March 2007)
- Fix reset_timer() handling
- As reported by Pieter [1] the overflow fix introduced a
delay of factor 16 (e.g 2 seconds became 32). While the
overflow fix is basically okay, it missed to divide udelay by
16, too. Fix this.
[1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179
- Remove software division of timer count value (DIV(x)
macro) and do it in hardware (TIM_CLK_DIV).
Many thanks to Troy Kisky 
and Pieter Voorthuijsen  for
the hints & testing!

Signed-off-by: Dirk Behme 

Acked-by: Pieter Voorthuijsen