u-boot.git/cpu/arm926ejs, branch v2009.01 Unnamed repository; edit this file 'description' to name the repository. i2c: merge all i2c_reg_read() and i2c_reg_write() into inline functions 2008-12-15T22:46:21+00:00 Timur Tabi timur@freescale.com 2008-12-03T17:28:30+00:00 ecf5f077c8e77454f532eaac3e3afb7cfc48c62d All implementations of the functions i2c_reg_read() and i2c_reg_write() are identical. We can save space and simplify the code by converting these functions into inlines and putting them in i2c.h. Signed-off-by: Timur Tabi <timur@freescale.com> Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
All implementations of the functions i2c_reg_read() and
i2c_reg_write() are identical. We can save space and simplify the
code by converting these functions into inlines and putting them in
i2c.h.

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-By: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Fix new found CFG_ 2008-12-14T09:55:30+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-12-14T09:29:39+00:00 3aed3aa2c128ce9fb39ca3f4e9385a7499e93dbf Also fix some minor typos. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Wolfgang Denk <wd@denx.de> 
Also fix some minor typos.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Remove compiler warning: target CPU does not support interworking 2008-12-13T22:41:23+00:00 Sergei Poselenov sposelenov@emcraft.com 2008-09-19T10:07:34+00:00 0e0c862efe7279e9609db74d758cd1b84c6c7209 This warning is issued by modern ARM-EABI GCC on non-thumb targets. Signed-off-by: Vladimir Panfilov <pvr@emcraft.com> Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com> 
This warning is issued by modern ARM-EABI GCC on non-thumb targets.

Signed-off-by: Vladimir Panfilov <pvr@emcraft.com>
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Remove redundant armv4 flag from arm926ejs compile flags 2008-12-06T19:34:12+00:00 Remy Bohmer linux@bohmer.net 2008-12-04T21:25:57+00:00 83ad179e2f0f625b88adb8ef5696709e46fb9077 Currently the arm926ejs tree has the armv4 option set during compilation. This flag does not belong here because a arm926 CPU is always a armv5 CPU. Signed-off-by: Remy Bohmer <linux@bohmer.net> 
Currently the arm926ejs tree has the armv4 option set during compilation.
This flag does not belong here because a arm926 CPU is always a armv5 CPU.

Signed-off-by: Remy Bohmer <linux@bohmer.net>
AT91: Enable PLLB for USB 2008-11-21T00:41:14+00:00 Stelian Pop stelian@popies.net 2008-11-08T23:14:46+00:00 3e0cda071a67cb5709e3fa4faf6b31a731859acc At least some (old ?) versions of the AT91Bootstrap do not set up the PLLB correctly to 48 MHz in order to make USB host function correctly. This patch sets up the PLLB to the same values Linux uses, and makes USB work ok on the following CPUs: - AT91CAP9 - AT91SAM9260 - AT91SAM9263 This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all the relevant AT91CAP9/AT91SAM9 atmel boards. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
At least some (old ?) versions of the AT91Bootstrap do not set up the
PLLB correctly to 48 MHz in order to make USB host function correctly.

This patch sets up the PLLB to the same values Linux uses, and makes USB
work ok on the following CPUs:
	- AT91CAP9
	- AT91SAM9260
	- AT91SAM9263

This patch also defines CONFIG_USB_STORAGE and CONFIG_CMD_FAT for all
the relevant AT91CAP9/AT91SAM9 atmel boards.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Align end of bss by 4 bytes 2008-11-18T22:13:16+00:00 Selvamuthukumar selva.muthukumar@e-coninfotech.com 2008-10-16T17:24:03+00:00 9b827cf1720acda2473afa516956eab6f7cca9a1 Most of the bss initialization loop increments 4 bytes at a time. And the loop end is checked for an 'equal' condition. Make the bss end address aligned by 4, so that the loop will end as expected. Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com> Signed-off-by: Wolfgang Denk <wd@denx.de> 
Most of the bss initialization loop increments 4 bytes
at a time. And the loop end is checked for an 'equal'
condition. Make the bss end address aligned by 4, so
that the loop will end as expected.

Signed-off-by: Selvamuthukumar <selva.muthukumar@e-coninfotech.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
ARM926EJ-S: relocate OMAP specific 'cpuinfo.c' into OMAP directory 2008-11-04T22:40:05+00:00 Roman Mashak romez777@gmail.com 2008-10-22T20:00:26+00:00 e352495318d8056a00faa21b633b3e4374bfbf52 OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory. It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap Signed-off-by: Roman Mashak <romez777@gmail.com> 
OMAP identification is implemented in 'cpuinfo.c' and located in ARM926EJ-S directory.
It makes sense to place this file in OMAP specific subdirectory, i.e. cpu/arm926ejs/omap

Signed-off-by: Roman Mashak <romez777@gmail.com>
rename CFG_ macros to CONFIG_SYS 2008-10-18T19:54:03+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-10-16T13:01:15+00:00 6d0f6bcf337c5261c08fabe12982178c2c489d76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash 2008-09-12T23:45:56+00:00 Wolfgang Denk wd@denx.de 2008-09-12T23:45:56+00:00 508eb85db7065e34948c189c83f7e348c1cfd61e 






ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c
2008-09-12T00:20:47+00:00

Hugo Villeneuve
hugo.villeneuve@lyrtech.com

2008-09-12T00:20:47+00:00

b5b0344957d32e3d07a8dd72fce64fb48e680ba4

ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>





ARM DaVinci: Remove duplicate code in cpu/arm926ejs/davinci/dp83848.c

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>