u-boot.git/cpu/arm_cortexa8/omap3/clock.c, branch master

arm: Move cpu/$CPU to arch/arm/cpu/$CPU

2010-04-13T07:13:24Z

Signed-off-by: Peter Tyser

OMAP3: Avoid re-write to PRM_CLKSRC_CTRL

2010-02-12T18:31:54Z

In function get_osc_clk_speed(), do not change/ update the divider for SYS_CLK as it can has cascading effect on the other derived clocks. Sudden change in divider value can lead to inconsistent behavior in the system - often leading to crashes. The problem was found when working with OMAP3EVM using DM3730 processor card. The patch has been tested with OMAP3530 on OMAP3EVM as well Signed-off-by: Sanjeev Premi Signed-off-by: Hiremath Vaibhav Signed-off-by: Sandeep Paulraj

omap3: remove typedefs for configuration structs

2009-08-08T09:33:23Z

Signed-off-by: Matthias Ludwig Signed-off-by: Dirk Behme

OMAP3 Turn on the GPIO bank clocks

2009-06-12T18:45:47Z

The function and interface clocks for each GPIO bank, except the first, must be explicitly turned on. These are controlled by the config level defines CONFIG_OMAP3_GPIO_n where n is from 2 to 6. Signed-off-by: Tom Rix Acked-by: Dirk Behme

OMAP3: Print correct silicon revision

2009-04-29T19:11:49Z

The function display_board_info() displays incorrect silicon revision - based on the return value from function get_cpu_rev(). This patch fixes the problem. Signed-off-by: Sanjeev Premi

OMAP3: Add common clock, memory and low level code

2009-01-24T16:51:21Z

Add common clock, memory and low level code Signed-off-by: Dirk Behme