u-boot.git/cpu/arm_cortexa8/omap3, branch v2009.08-rc1

ARM Cortex A8: Move OMAP3 specific reset handler

2009-07-22T21:39:42Z

Because of the reset_cpu is soc specific, should be move to soc Cc: Dirk Behme Signed-off-by: Minkyu Kang

Coding style cleanup; update CHANGELOG

2009-07-07T20:35:02Z

Signed-off-by: Wolfgang Denk

move L2 cache enable/disable function to cache.c in the omap3 SoC directory

2009-07-06T19:52:25Z

Signed-off-by: HeungJun, Kim CC: Dirk Behme Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

General help message cleanup

2009-06-12T18:47:16Z

Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk

OMAP3 Turn on the GPIO bank clocks

2009-06-12T18:45:47Z

The function and interface clocks for each GPIO bank, except the first, must be explicitly turned on. These are controlled by the config level defines CONFIG_OMAP3_GPIO_n where n is from 2 to 6. Signed-off-by: Tom Rix Acked-by: Dirk Behme

arm: unify linker script

2009-06-12T18:39:52Z

all arm boards except a few use the same cpu linker script so move it to cpu/$(CPU) that could be overwrite in following order SOC BOARD via the corresponding config.mk Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

OMAP3 Port kernel omap gpio interface.

2009-06-12T18:39:50Z

Port version 2.6.27 of the linux kernel's omap gpio interface to u-boot. The orignal source is in linux/arch/arm/plat-omap/gpio.c See doc/README.omap3 for instructions on use. Signed-off-by: Tom Rix

OMAP Consolidate common u-boot.lds to cpu layer.

2009-06-12T18:39:49Z

The u-boot.lds file is common for all omap boards. Move a cleaned up version to the cpu layer and add makefile logic to use it. Signed-off-by: Tom Rix

arm: timer and interrupt init rework

2009-06-12T18:39:48Z

actually the timer init use the interrupt_init as init callback which make the interrupt and timer implementation difficult to follow so now rename it as int timer_init(void) and use interrupt_init for interrupt btw also remane the corresponding file to the functionnality implemented as ixp arch implement two timer - one based on interrupt - so all the timer related code is moved to timer.c Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

OMAP3: Reorganize Makefile style

2009-06-12T18:39:48Z

Reformat COBJS handling. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Dirk Behme