u-boot.git/cpu/mips/incaip_clock.c, branch master

mips: Move cpu/mips/* to arch/mips/cpu/*

2010-04-13T07:13:25+00:00

Signed-off-by: Peter Tyser

Cleanup: fix "MHz" spelling

2008-10-21T09:25:39+00:00

Signed-off-by: Wolfgang Denk

Code cleanup, especially MIPS for GCC 4.x

2005-12-03T23:40:34+00:00

* Implement adaptive SDRAM timing configuration based on actual CPU

2004-01-29T09:22:58+00:00

  clock frequency for INCA-IP; fix problem with board hanging when
  switching from 150MHz to 100MHz

* Add PCMCIA CS support for BMS2003 board

* Fix PS/2 keyboard problem caused by statically initialized variable

2004-01-21T20:46:28+00:00

  pointing to a location in flash

* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.

Cleanup

2003-12-27T19:29:48+00:00

* Make CPU clock on ICA-IP board controllable by a "cpuclk"

2003-12-27T19:24:54+00:00

  environment variable which can set to "100", "133", or "150". The
  CPU clock will be configured accordingly upon next reboot. Other
  values are ignored. In case of an invalid or undefined "cpuclk"
  value, the compile-time default CPU clock speed will be used.

* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
  window that is used to access the UART registers by the Linux driver)

* Patch by Reinhard Meyer, 20 Dec 2003:
  Fix clock calculation for the MPC5200 for higher clock frequencies
  (above 2**32 / 10 = 429.5 MHz).

* Code cleanup:

2003-06-27T21:31:46+00:00

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

* Add support for MIPS32 4Kc CPUs

2003-03-27T12:09:35+00:00

* Add support for INCA-IP Board