u-boot.git/cpu/mpc512x, branch v1.3.4-rc2

Fix some more print() format errors.

2008-07-10T23:16:00Z

Signed-off-by: Wolfgang Denk

Configuration changes for ADS5121 Rev 3

2008-07-10T17:36:42Z

ADS5121 Rev 3 board is now the default config config targets are now ads5121_config Rev 3 board with PCI M41T62 on board RTC 512MB DRAM ads5121_rev2_config Rev 2 board with No PCI 256MB DRAM Signed-off-by: Martha Marx Acked-by: Grant Likely Acked-by: John Rigby

Consolidate ADS5121 IO Pin configuration

2008-07-10T17:36:32Z

Consolidate ADS5121 IO Pin configuration to one file board/ads5121/iopin.c. Remove pin config from cpu/mpc512x/fec.c Signed-off-by: Martha Marx Acked-by: Grant Likely Acked-by: John Rigby

MPC512x: Change traps.c to not reference non-addressable memory

2008-06-03T17:47:14Z

Currently, END_OF_RAM is used by the trap code to determine if we should attempt to access the stack pointer or not. However, on systems with a lot of RAM, only a subset of the RAM is guaranteed to be mapped in and accessible. Change END_OF_RAM to use get_effective_memsize() instead of using the raw ram size out of the bd. Signed-off-by: Becky Bruce

Big white-space cleanup.

2008-05-20T22:14:08Z

This commit gets rid of a huge amount of silly white-space issues. Especially, all sequences of SPACEs followed by TAB characters get removed (unless they appear in print statements). Also remove all embedded "vim:" and "vi:" statements which hide indentation problems. Signed-off-by: Wolfgang Denk

MPC5121e ADS PCI support take 3

2008-03-02T20:44:59Z

Adds PCI support for MPC5121 Tested with drivers/net/rtl8139.c Support is conditional since PCI on old silicon does not work. ads5121_PCI_config turns on PCI In this version, condition compilation of PCI code has been moved from ifdef in board/ads5121/pci.c to board/ads5121/Makefile as suggested by Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: John Rigby

PPC: Use r2 instead of r29 as global data pointer

2008-02-14T21:43:22Z

R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc will refuse to use load/store multiple insns; instead, it issues a list of simple load/store instructions upon function entry and exit, resulting in bigger code size, which in turn makes the build for a few boards fail. Use r2 instead. Signed-off-by: Wolfgang Denk

ppc: Refactor cache routines, so there is only one common set.

2008-02-14T21:00:41Z

Signed-off-by: Rafal Jaworowski

Device tree updates

2008-02-07T00:08:10Z

Changes to match 5121 device tree going mainline in 2.6.25. Change OF_SOC from "soc5121" to plain "soc". Remove unneeded "ref-frequency" fixups. Remove "address" enetaddr fixup. Add bus-frequency fixup for old OF_SOC so old kernels with old device trees will work with new u-boot with 66MHz IPS clock Signed-off-by: John Rigby

MPC512X: Cleanup bus clock names.

2008-01-12T14:37:49Z

Signed-off-by: Grzegorz Bernacki