u-boot.git/cpu/mpc512x, branch v2008.10

Moved initialization of MPC512x_FEC Ethernet driver to CPU directory

2008-09-03T04:18:17+00:00

Added a cpu_eth_init() function to MPC512x CPU directory and
removed code from net/eth.c

Signed-off-by: Ben Warren

Move MPC512x_FEC driver to drivers/net

2008-08-29T19:58:12+00:00

Signed-off-by: Ben Warren

fdt: rework fdt_fixup_ethernet() to use env instead of bd_t

2008-08-21T00:07:43+00:00

Move to using the environment variables 'ethaddr', 'eth1addr', etc..
instead of bd->bi_enetaddr, bi_enet1addr, etc.

This makes the code a bit more flexible to the number of ethernet
interfaces.

Signed-off-by: Kumar Gala

ads5121: fix compiler warnings (unused variables)

2008-08-11T22:36:53+00:00

Signed-off-by: Wolfgang Denk

mpc5121: Move iopin features from board specific to common files.

2008-08-06T02:45:34+00:00

And in the process eliminate some duplicate register defines.

Signed-off-by: Kenneth Johansson

mpc5121: squash some fdt fixup errors

2008-08-06T01:58:21+00:00

On ADS5121 when booting linux the following errors are seen:
    Unable to update property /soc5121@80000000:bus-frequency, err=FDT_ERR_NOTFOUND
    Unable to update property /soc5121@80000000/ethernet@2800:local-mac-address, err=FDT_ERR_NOTFOUND
    Unable to update property /soc5121@80000000/ethernet@2800:address, err=FDT_ERR_NOTFOUND

This is caused by ft_cpu_setup trying to deal with
both old and new soc node naming.  This patch
fixes this by being smarter about what to
fixup.

Also do soc node fixups by compatible instead of by path.
A new board config called OF_SOC_COMPAT defined
to be "fsl,mpc5121-immr" replaces the old
OF_SOC node path that was defined to be "soc@80000000".

Old device trees still work, but the compatiblity
is conditional on CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
which is on by default in include/configs/ads5121.h.

Signed-off-by: John Rigby

Fix some more print() format errors.

2008-07-10T23:16:00+00:00

Signed-off-by: Wolfgang Denk

Configuration changes for ADS5121 Rev 3

2008-07-10T17:36:42+00:00

ADS5121 Rev 3 board is now the default config

config targets are now

ads5121_config
    Rev 3 board with
	PCI
	M41T62 on board RTC
	512MB DRAM

ads5121_rev2_config
    Rev 2 board with
	No PCI
	256MB DRAM

Signed-off-by: Martha Marx 
Acked-by: Grant Likely 
Acked-by: John Rigby

Consolidate ADS5121 IO Pin configuration

2008-07-10T17:36:32+00:00

Consolidate ADS5121 IO Pin configuration to one file
board/ads5121/iopin.c.

Remove pin config from cpu/mpc512x/fec.c

Signed-off-by: Martha Marx 
Acked-by: Grant Likely 
Acked-by: John Rigby

MPC512x: Change traps.c to not reference non-addressable memory

2008-06-03T17:47:14+00:00

Currently, END_OF_RAM is used by the trap code to determine if
we should attempt to access the stack pointer or not. However,
on systems with a lot of RAM, only a subset of the RAM is
guaranteed to be mapped in and accessible.  Change END_OF_RAM
to use get_effective_memsize() instead of using the raw ram
size out of the bd.

Signed-off-by: Becky Bruce