u-boot.git/cpu/mpc5xxx/fec.c, branch origin

* Add support for HMI1001 board

2005-06-10T10:00:19+00:00

* Disable "date" and "sntp" commands on TQM866M which has no RTC

Add support for canmb board

2005-04-13T23:15:10+00:00

* Add support for ext2 filesystems and image timestamps to TQM5200 board

2005-02-24T22:44:16+00:00

* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver

Add support for INKA4X0 board

2004-12-16T15:52:40+00:00

Patch by Mark Jonas, 01 Jul 2004:

2004-07-11T19:17:20+00:00

Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
MGT5100 and MPC5200 based Freescale platforms.

* Patch by Martin Krause, 30 Jun 2004:

2004-07-11T17:40:54+00:00

  Add support for TQM5200 board

* Patch by Martin Krause, 29 Jun 2004:
  Add loopw command: infinite write loop on address range

Fix minor network problem on MPC5200

2004-05-12T22:18:31+00:00

* Patch by Mark Jonas: Remove config.tmp files only when

2004-04-08T22:31:29+00:00

  unconfiguring the board

* Adapt RMU board for bigger flash memory

* Test fix for ethernet problems on MPC5200

* Patch by Phillippe Robin, 16 Mar 2004:

2004-03-23T21:43:07+00:00

  avoid dereferencing NULL pointer in lib_arm/armlinux.c

* Patch by Stephen Williams, 15 Mar 2004:
  Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation

* Patch by Tolunay Orkun, 15 Mar 2004:
  Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()

* Patch by Travis Sawyer, 15 Mar 2004:
  Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port

* Add start-up delay to make sure power has stabilized before

2004-03-23T20:18:25+00:00

  attempting to switch on USB on SX1 board.

* Patch by Josef Wagner, 18 Mar 2004:
  - Add support for MicroSys XM250 board (PXA255)
  - Add support for MicroSys PM828 board (MPC8280)
  - Add support for 32 MB Flash on PM825/826
  - new SDRAM refresh rate for PM825/PM826
  - added support for MicroSys PM520 (MPC5200)
  - replaced Query by Identify command in CPU86/flash.c
    to support 28F160F3B

* Fix wrap around problem with udelay() on ARM920T

* Add support for Macronix flash on TRAB board