u-boot.git/cpu/mpc5xxx, branch LABEL_2004_02_24_0305Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/cpu/mpc5xxx?h=LABEL_2004_02_24_03052004-02-24T02:00:03Z* Patch by Masami Komiy, 22 Feb 2004:2004-02-24T02:00:03Zwdenkwdenk2004-02-24T02:00:03Zurn:sha1:cbd8a35c6dbaaca35494cbec319960887ad02dcf
Add support for NFS for file download
* Minor code cleanup
* Patches by Reinhard Meyer, 14 Feb 2004:2004-02-23T22:22:28Zwdenkwdenk2004-02-23T22:22:28Zurn:sha1:63e73c9a8ed5b32d9c4067ffaad953e9a8fe8f0a
- update board/emk tree; use common flash driver
- Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
[adapted for other PPC CPUs -- wd]
- Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
* Patch by Jon Diekema, 13 Feb 2004:
Call show_boot_progress() whenever POST "FAILED" is printed.
* Patch by Nishant Kamat, 13 Feb 2004:
Add support for TI OMAP1610 H2 Board
Fixes for cpu/arm926ejs/interrupt.c
(based on Richard Woodruff's patch for arm925, 16 Oct 03)
Fix for a timer bug in OMAP1610 Innovator
Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
* Patches by Stephan Linz, 12 Feb 2004:
- add support for NIOS timer with variable period preload counter value
- prepare POST framework support for NIOS targets
* Patch by Denis Peter, 11 Feb 2004:
add POST support for the MIP405 board
* Patch by Travis Sawyer, 09 Feb 2004:2004-02-22T23:46:08Zwdenkwdenk2004-02-22T23:46:08Zurn:sha1:3c74e32a98187c792edcea3e0e39150de5a8dda6
o 440GX:
- Fix PCI Indirect access for type 1 config cycles with ppc440.
- Add phymode for 440 enet
- fix pci pre init
o XPedite1K:
- Change board_pre_init to board_early_init_f
- Add user flash to bus controller setup
- Fix pci pre init
- Fix is_pci_host to check GPIO for monarch bit
- Force xpedite1k to pci conventional mode (via #define option)
* Patch by Brad Kemp, 4 Feb 2004:
- handle the machine check that is generated during the PCI scans
on 82xx processors.
- define the registers used in the IMMR by the PCI subsystem.
* Patch by Pierre Aubert, 03 Feb 2004:
cpu/mpc5xxx/start.S: copy MBAR into SPR311
* Patch by Jeff Angielski, 03 Feb 2004:
Fix copy & paste error in cpu/mpc8260/pci.c
* Patch by Reinhard Meyer, 24 Jan 2004:
Fix typo in cpu/mpc5xxx/pci_mpc5200.c
* Patch by Rahul Shanbhag, 28 Jan 2004:2004-02-09T20:51:26Zwdenkwdenk2004-02-09T20:51:26Zurn:sha1:b98fff1d6acc57cc54f01740028535ac095237cd
Fix flash protection/locking handling for OMAP1610 innovator board.
* Patch by Rolf Peukert, 28 Jan 2004:
fix flash write problems on CSB226 board (write with 32 bit bus width)
* Patches by Mark Jonas, 16 Jan 2004:
- fix rounding error when calculating baudrates for MPC5200 PSCs
- make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
time which is not supported
* Cleanup lowboot code for MPC52002004-01-02T14:00:00Zwdenkwdenk2004-01-02T14:00:00Zurn:sha1:d4ca31c40e8888b36635967522ec7ea03fd7e70b
* Minor code cleanup (coding style)
* Patch by Reinhard Meyer, 30 Dec 2003:
- cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
- added CONFIG_PHY_ADDR to include/configs/IceCube.h,
- turned debug print of PHY registers into a function (called in two places)
- added support for EMK MPC5200 based modules
* Fix MPC8xx PLPRCR_MFD_SHIFT typo
* Add support for TQM866M modules
* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
* Fix a few compiler warnings
* Make CPU clock on ICA-IP board controllable by a "cpuclk"2003-12-27T19:24:54Zwdenkwdenk2003-12-27T19:24:54Zurn:sha1:7cb22f97ee41f344cf6542c077abf124c38ec5c6
environment variable which can set to "100", "133", or "150". The
CPU clock will be configured accordingly upon next reboot. Other
values are ignored. In case of an invalid or undefined "cpuclk"
value, the compile-time default CPU clock speed will be used.
* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
window that is used to access the UART registers by the Linux driver)
* Patch by Reinhard Meyer, 20 Dec 2003:
Fix clock calculation for the MPC5200 for higher clock frequencies
(above 2**32 / 10 = 429.5 MHz).
* Patch by Gleb Natapov, 19 Sep 2003:2003-12-06T19:49:23Zwdenkwdenk2003-12-06T19:49:23Zurn:sha1:a8c7c708a9e0051c6358718c53572a4681eaa22b
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
* Patch by Anders Larsen, 17 Sep 2003:
Bring ARM memory layout in sync with the documentation:
stack and malloc-heap are now located _below_ the U-Boot code
* Use "-fPIC" instead of "-mrelocatable" to prevent problems with2003-11-17T21:14:37Zwdenkwdenk2003-11-17T21:14:37Zurn:sha1:5bb226e821ea3c10c52d768ffab7952204b0f816
recent tools
* Add checksum verification to 'imls' command
* Add bd_info fields needed for 4xx Linux I2C driver
* Patch by Martin Krause, 4 Nov. 2003:
Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
* Print used network interface when CONFIG_NET_MULTI is set
* Patch by Bernhard Kuhn, 28 Oct 2003:2003-11-07T13:42:26Zwdenkwdenk2003-11-07T13:42:26Zurn:sha1:5cf9da4821db0b6d86d8bbb74af86a0303063201
Add low boot support for MPC5200
* Fix problem with dual PCMCIA support (NSCU)
* Fix MPC5200 I2C initialization function
* Patches by Xianghua Xiao, 15 Oct 2003:2003-10-15T23:53:47Zwdenkwdenk2003-10-15T23:53:47Zurn:sha1:42d1f0394bef0624fc9664714d54bb137931d6a6
- Added Motorola CPU 8540/8560 support (cpu/85xx)
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
* Minor code cleanup