u-boot.git/cpu/mpc5xxx, branch LABEL_2004_09_09_0000 Unnamed repository; edit this file 'description' to name the repository. http://cgit.235523.xyz/u-boot.git/atom/cpu/mpc5xxx?h=LABEL_2004_09_09_0000 2004-07-12T14:37:59Z Patch by Mark Jonas, 02 Jul 2004: 2004-07-12T14:37:59Z wdenk wdenk 2004-07-12T14:37:59Z urn:sha1:07cba3514b260aad26409fab2dfadbd9d2e467dc Fix lowboot (again) on MPC5xxx Patch by Mark Jonas, 01 Jul 2004: 2004-07-11T19:17:20Z wdenk wdenk 2004-07-11T19:17:20Z urn:sha1:6c7a14084ae5f7dde3819e4ab43fd78ea82805fe Added support for Total5100 and Total5200 (Rev.1 and Rev.2) MGT5100 and MPC5200 based Freescale platforms. * Patch by Martin Krause, 30 Jun 2004: 2004-07-11T17:40:54Z wdenk wdenk 2004-07-11T17:40:54Z urn:sha1:56523f12830227fc18437bf935fefdb10fe25cca Add support for TQM5200 board * Patch by Martin Krause, 29 Jun 2004: Add loopw command: infinite write loop on address range * Patch by Mark Jonas, 08 June 2004: 2004-06-09T17:45:32Z wdenk wdenk 2004-06-09T17:45:32Z urn:sha1:36c728774edcfca54766f6828173fe24d3d8aa0b - Make MPC5200 boards evaluate the SVR to print processor name and version in checkcpu() (cpu/mpc5xxx/cpu.c). * Patch by Kai-Uwe Bloem, 06 May 2004: Fix endianess problem in cramfs code * Patch by Martin Krause, 27 May 2004: 2004-06-09T15:29:49Z wdenk wdenk 2004-06-09T15:29:49Z urn:sha1:697037fe9b68fdf8cf7ce63f7875912f365270b7 Fix a MPC5xxx I2C timing issue in i2c_probe(). * Patch by Leif Lindholm, 27 May 2004: Fix board_init_f() for dbau1x00 board. Fix minor network problem on MPC5200 2004-05-12T22:18:31Z wdenk wdenk 2004-05-12T22:18:31Z urn:sha1:6c1362cf637ccaa89806edf70f000009672c509e * Temporarily disabled John Kerl's extended MII command code because 2004-04-18T23:32:11Z wdenk wdenk 2004-04-18T23:32:11Z urn:sha1:e35745bb64fae64da3e1fa7f4afe3213287f5908 "miivals.h" is missing * Patches by Mark Jonas, 13 Apr 2004: - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S - Add sync instructions to IceCube SDRAM init code - Move SDRAM chip constants into seperate include files - Unify DDR and SDR initialization code - Unify all IceCube (Lite5xxx) target names * Patch by Mark Jonas: Remove config.tmp files only when 2004-04-08T22:31:29Z wdenk wdenk 2004-04-08T22:31:29Z urn:sha1:7e780369e43ebf5c9e337dfad84dd36b2a08a21f unconfiguring the board * Adapt RMU board for bigger flash memory * Test fix for ethernet problems on MPC5200 * Patch by Phillippe Robin, 16 Mar 2004: 2004-03-23T21:43:07Z wdenk wdenk 2004-03-23T21:43:07Z urn:sha1:109c0e3ad32428dd65ed89f882faf59e30132494 avoid dereferencing NULL pointer in lib_arm/armlinux.c * Patch by Stephen Williams, 15 Mar 2004: Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation * Patch by Tolunay Orkun, 15 Mar 2004: Initialize bi_opbfreq to real OPB frequency via get_OPB_freq() * Patch by Travis Sawyer, 15 Mar 2004: Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port * Add start-up delay to make sure power has stabilized before 2004-03-23T20:18:25Z wdenk wdenk 2004-03-23T20:18:25Z urn:sha1:efa329cb892c8b9a5e453638b3ca57c94b71e9a2 attempting to switch on USB on SX1 board. * Patch by Josef Wagner, 18 Mar 2004: - Add support for MicroSys XM250 board (PXA255) - Add support for MicroSys PM828 board (MPC8280) - Add support for 32 MB Flash on PM825/826 - new SDRAM refresh rate for PM825/PM826 - added support for MicroSys PM520 (MPC5200) - replaced Query by Identify command in CPU86/flash.c to support 28F160F3B * Fix wrap around problem with udelay() on ARM920T * Add support for Macronix flash on TRAB board