u-boot.git/cpu/mpc8260/cpu.c, branch master Unnamed repository; edit this file 'description' to name the repository. ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU 2010-04-13T07:13:16+00:00 Peter Tyser ptyser@xes-inc.com 2010-04-13T03:28:09+00:00 8d1f268204b07e172f3cb5cee0a3974d605b0b98 Signed-off-by: Peter Tyser <ptyser@xes-inc.com> 
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
mpc8260: move FDT memory node fixup into common CPU code. 2009-11-22T22:16:28+00:00 Marcel Ziswiler marcel@ziswiler.com 2009-10-01T21:55:17+00:00 cada315100c88894b85972a91309a6f2413966b6 Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com> Tested-by: Heiko Schocher <hs@denx.de> 
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@noser.com>
Tested-by: Heiko Schocher <hs@denx.de>
MPC8260: fixup device tree by property instead of path 2009-05-15T20:03:09+00:00 Wolfgang Denk wd@denx.de 2009-05-12T13:17:35+00:00 fe6da4837308aa33d537ac3e7f36c2d66e3d9a36 cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the clock frequencies in the device tree, using a CPU path "/cpus/OF_CPU", with OF_CPU beind defined in the board config file. However, this does not work when one board config file (here: MPC8260ADS.h) is intended to be used for several diffrent CPUs and therefor contains a generic definition like "cpu@0", as the device trees that will then be loaded will contain specific names like "PowerPC,8272@0". We switch to using do_fixup_by_prop_u32() instead, so we can search for device_type="cpu", as it is done in other architectures, too. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Tested-by: Heiko Schocher <hs@denx.de> 
cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
clock frequencies in the device tree, using a CPU path
"/cpus/OF_CPU", with OF_CPU beind defined in the board config file.

However, this does not work when one board config file (here:
MPC8260ADS.h) is intended to be used for several diffrent CPUs and
therefor contains a generic definition like "cpu@0", as the device
trees that will then be loaded will contain specific names like
"PowerPC,8272@0".

We switch to using do_fixup_by_prop_u32() instead, so we can search
for device_type="cpu", as it is done in other architectures, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
mpc8260: Fill in brg's clock-frequency in device tree. 2009-04-04T21:29:46+00:00 Scott Wood scottwood@freescale.com 2009-04-02T21:10:36+00:00 3a671fc06ae1d9e8eba76600372317c75ae0eb3e Signed-off-by: Scott Wood <scottwood@freescale.com> 
Signed-off-by: Scott Wood <scottwood@freescale.com>
Fix MPC8260 with ethernet on SCC 2009-02-10T06:47:06+00:00 ksi@koi8.net ksi@koi8.net 2009-02-07T00:27:55+00:00 2bc2a8f6dc9fdda465317da59474e65c24a398a2 This fixes MPC8260 compilation with ethernet on SCC. Probably was a typo or something... Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
This fixes MPC8260 compilation with ethernet on SCC. Probably was a
typo or something...

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
mgcoge make ether_scc.c work with CONFIG_NET_MULTI 2009-01-25T04:45:52+00:00 Gary Jennejohn garyj@denx.de 2008-11-20T11:28:38+00:00 ba705b5b1a97b47388ed48858bef6bf7b6bfcd56 This change is needed for mgcoge because it uses two ethernet drivers. Add a check for the presence of the PIGGY board on mgcoge. Without this board networking cannot work and the initialization must be aborted. Only allocate rtx once to prevent DPRAM exhaustion. Initialize ether_scc.c and the keymile-specific HDLC driver (to be added soon) in eth.c. Signed-off-by: Gary Jennejohn <garyj@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
This change is needed for mgcoge because it uses two ethernet drivers.

Add a check for the presence of the PIGGY board on mgcoge.  Without this
board networking cannot work and the initialization must be aborted.

Only allocate rtx once to prevent DPRAM exhaustion.

Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
soon) in eth.c.

Signed-off-by: Gary Jennejohn <garyj@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Moved initialization of FCC Ethernet controller to cpu_eth_init 2008-11-10T05:38:02+00:00 Ben Warren biggerbadderben@gmail.com 2008-10-23T06:20:29+00:00 3456a148276d5494b53ee40242efb6462d163504 Affected boards: Several MPC8xx boards Several MPC8260/MPC8272 boards Several MPC85xx boards Removed initialization of the driver from net/eth.c Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
Affected boards:
    Several MPC8xx boards
    Several MPC8260/MPC8272 boards
    Several MPC85xx boards

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
rename CFG_ macros to CONFIG_SYS 2008-10-18T19:54:03+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-10-16T13:01:15+00:00 6d0f6bcf337c5261c08fabe12982178c2c489d76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
fdt: rework fdt_fixup_ethernet() to use env instead of bd_t 2008-08-21T00:07:43+00:00 Kumar Gala galak@kernel.crashing.org 2008-08-19T20:41:18+00:00 ba37aa03287c5483c61c0a3e320c8888bee0143a Move to using the environment variables 'ethaddr', 'eth1addr', etc.. instead of bd->bi_enetaddr, bi_enet1addr, etc. This makes the code a bit more flexible to the number of ethernet interfaces. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> 
Move to using the environment variables 'ethaddr', 'eth1addr', etc..
instead of bd->bi_enetaddr, bi_enet1addr, etc.

This makes the code a bit more flexible to the number of ethernet
interfaces.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
mpc8260: add fdt_fixup_ethernet support 2008-07-01T21:44:22+00:00 Esben Haabendal EsbenHaabendal@gmail.com 2008-06-18T09:03:57+00:00 ee4ae38342142237ca85913f88ee570c1eb5ca7c Add support for updating mac-address and local-mac-address in fdt for all MPC8260 targets. Signed-off-by: Esben Haabendal <eha@doredevelopment.dk> 
Add support for updating mac-address and local-mac-address in fdt for
all MPC8260 targets.

Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>