u-boot.git/cpu/mpc8260/cpu.c, branch v2009.06

MPC8260: fixup device tree by property instead of path

2009-05-15T20:03:09+00:00

cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
clock frequencies in the device tree, using a CPU path
"/cpus/OF_CPU", with OF_CPU beind defined in the board config file.

However, this does not work when one board config file (here:
MPC8260ADS.h) is intended to be used for several diffrent CPUs and
therefor contains a generic definition like "cpu@0", as the device
trees that will then be loaded will contain specific names like
"PowerPC,8272@0".

We switch to using do_fixup_by_prop_u32() instead, so we can search
for device_type="cpu", as it is done in other architectures, too.

Signed-off-by: Wolfgang Denk 
Cc: Heiko Schocher 
Acked-by: Heiko Schocher 
Tested-by: Heiko Schocher

mpc8260: Fill in brg's clock-frequency in device tree.

2009-04-04T21:29:46+00:00

Signed-off-by: Scott Wood

Fix MPC8260 with ethernet on SCC

2009-02-10T06:47:06+00:00

This fixes MPC8260 compilation with ethernet on SCC. Probably was a
typo or something...

Signed-off-by: Sergey Kubushyn 
Signed-off-by: Ben Warren

mgcoge make ether_scc.c work with CONFIG_NET_MULTI

2009-01-25T04:45:52+00:00

This change is needed for mgcoge because it uses two ethernet drivers.

Add a check for the presence of the PIGGY board on mgcoge.  Without this
board networking cannot work and the initialization must be aborted.

Only allocate rtx once to prevent DPRAM exhaustion.

Initialize ether_scc.c and the keymile-specific HDLC driver (to be added
soon) in eth.c.

Signed-off-by: Gary Jennejohn 
Signed-off-by: Ben Warren

Moved initialization of FCC Ethernet controller to cpu_eth_init

2008-11-10T05:38:02+00:00

Affected boards:
    Several MPC8xx boards
    Several MPC8260/MPC8272 boards
    Several MPC85xx boards

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren

rename CFG_ macros to CONFIG_SYS

2008-10-18T19:54:03+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

fdt: rework fdt_fixup_ethernet() to use env instead of bd_t

2008-08-21T00:07:43+00:00

Move to using the environment variables 'ethaddr', 'eth1addr', etc..
instead of bd->bi_enetaddr, bi_enet1addr, etc.

This makes the code a bit more flexible to the number of ethernet
interfaces.

Signed-off-by: Kumar Gala

mpc8260: add fdt_fixup_ethernet support

2008-07-01T21:44:22+00:00

Add support for updating mac-address and local-mac-address in fdt for
all MPC8260 targets.

Signed-off-by: Esben Haabendal

[new uImage] Pull in libfdt if CONFIG_FIT is enabled

2008-02-21T16:20:18+00:00

New uImage format (Flattened Image Tree) requires libfdt
functionality, print out error message if CONFIG_OF_LIBFDT
is not defined.

New uImage support is enabled by defining CONFIG_FIT (and CONFIG_OF_LIBFDT).
This commit turns it on by default.

Signed-off-by: Marian Balakowicz

Move do_fixup* for libfdt into common code

2007-11-21T20:01:49+00:00

Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260
into common/fdt_support.c and renamed:

do_fixup()	-> do_fixup_by_path()
do_fixup_u32() 	-> do_fixup_by_path_u32()

Signed-off-by: Kumar Gala