u-boot.git/cpu/mpc83xx/Makefile, branch v2009.06

mpc83xx: Add support for MPC83xx PCI-E controllers

2009-01-22T00:43:49+00:00

This patch adds support for MPC83xx PCI-E controllers in Root Complex
mode.

The patch is based on Tony Li and Dave Liu work[1].

Though unlike the original patch, by default we don't register PCI-E
buses for use in U-Boot, we only configure the controllers for future
use in other OSes (Linux). This is done because we don't have enough
of spare BATs to map all the PCI-E regions.

To actually use PCI-E in U-Boot, users should explicitly define
CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES symbol in the board file. And
only then U-Boot will able to access PCI-E, but at the cost of disabled
address translation.

[1] http://lists.denx.de/pipermail/u-boot/2008-January/027630.html

Signed-off-by: Tony Li 
Signed-off-by: Anton Vorontsov 
Acked-by: Dave Liu 
Signed-off-by: Kim Phillips

83xx: serdes setup routines

2008-03-26T00:16:45+00:00

This patch adds few routines to configure serdes on 837x targets.

Signed-off-by: Anton Vorontsov

83xx: split COBJS onto separate lines

2008-03-26T00:16:44+00:00

..plus get rid of some #ifdefs in the .c files.

Signed-off-by: Anton Vorontsov

mpc83xx: convert to using do_fixup_*()

2008-01-08T15:56:42+00:00

convert to using simpler mpc85xx style fdt update code; streamline by
eliminating macros OF_SOC, OF_CPU, etc. which allows us to rm
the old school FLAT_TREE code from 83xx (since the sbc8349 was just
converted over to using libfdt).

Signed-off-by: Kim Phillips

mpc83xx: Consolidate the ECC support of 83xx

2007-08-10T06:13:11+00:00

Remove the duplicated source code of ecc command on the .c,
for reused, move these code to cpu/mpc83xx directory.

Signed-off-by: Dave Liu 
Signed-off-by: Kim Phillips

mpc83xx: Add generic PCI setup code.

2007-04-23T21:32:00+00:00

Board code can now request the generic setup code rather than having to
copy-and-paste it for themselves.  Boards should be converted to use this
once they're tested with it.

Signed-off-by: Scott Wood

mpc83xx: Update 83xx to use fsl_i2c.c

2006-11-04T01:42:23+00:00

Update the 83xx tree to use I2C support in drivers/fsl_i2c.c.  Delete
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
Added multiple I2C bus support to fsl_i2c.c.

Signed-off-by: Timur Tabi

mpc83xx: add QE ethernet support

2006-11-04T01:42:21+00:00

this patch adds support for the QUICC Engine based UCC gigabit ethernet device.

mpc83xx: Removed unused file resetvec.S for mpc83xx cpu

2006-11-04T01:42:17+00:00

Removed unused file resetvec.S for mpc83xx cpu

Signed-off-by: Tanya Jiang

Move "ar" flags to config.mk to allow for silent "make -s"

2006-10-08T23:02:05+00:00

Based on patch by Mike Frysinger, 20 Jun 2006