u-boot.git/cpu/mpc83xx/cpu.c, branch master

ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

2010-04-13T07:13:16+00:00

Signed-off-by: Peter Tyser

Bug: do_reset issued via netconsole does not reset mpc83xx cpu.

2010-02-19T00:25:09+00:00

The do_reset routine in the cpu/mpc83xx/cpu.c file does not reset
the mpc83xx cpu when issued via netconsole.

Moving the console output "resetting the board." to the beginning of
the routine before disabling interrupts solved the problem.

Signed-off-by: Michael Zaidman 
Acked-by: Detlev Zundel 
Signed-off-by: Kim Phillips

83xx: Add support for fsl_dma driver

2009-07-02T16:15:57+00:00

Signed-off-by: Peter Tyser 
Reviewed-by: Ira W. Snyder 
Tested-by: Ira W. Snyder 
Acked-by: Kim Phillips 
Signed-off-by: Kumar Gala

8xxx: Rename dma_xfer() to dmacpy()

2009-07-02T04:07:47+00:00

Also update dmacpy()'s argument order to match memcpy's and use
phys_addr_t/phy_size_t for address/size arguments

Signed-off-by: Peter Tyser 
Signed-off-by: Kumar Gala

qe: Pass in uec_info struct through uec_initialize

2009-06-12T22:17:02+00:00

The uec driver contains code to hard code configuration information for the uec
ethernet controllers. This patch creates an array of uec_info structures, which
are then parsed by the corresponding driver instance to determine configuration.
It also creates function uec_standard_init() to initialize all UEC interfaces
for 83xx and 85xx.

Signed-off-by: Haiying Wang 
Signed-off-by: Kumar Gala

8360, kmeter1: added bootcount feature.

2009-03-06T00:21:30+00:00

add CONFIG_BOOTCOUNT_LIMIT feature for 8360 CPU.

The bootcounter uses 8 bytes from the muram,
because no other memory was found on this
CPU for the bootcount feature. So we must
correct the muram size in DTS before booting
Linux.

This feature is actual only implemented for
MPC8360, because not all 83xx CPU have qe,
and therefore no muram, which this feature
uses.

Signed-off-by: Heiko Schocher 
Signed-off-by: Kim Phillips

83xx: Add eSDHC support on 8379 EMDS board

2009-02-17T00:07:43+00:00

Signed-off-by: Andy Fleming

Moved initialization of QE Ethernet controller to cpu_eth_init()

2008-11-10T05:38:03+00:00

Removed initialization of the driver from net/eth.c

Signed-off-by: Ben Warren

Make Freescale local bus registers available for both 83xx and 85xx.

2008-10-29T16:12:53+00:00

- Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it
  can be shared by both 83xx and 85xx
- Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards
  files which use lbus83xx_t.
- Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that
  85xx can share them.

Signed-off-by: Jason Jin 
Signed-off-by: Haiying Wang 
Signed-off-by: Scott Wood

mpc83xx: Removed #ifdef CONFIG_MPC834X dependency on upmconfig function

2008-10-21T23:41:04+00:00

This is done to allow other 83XX based platforms which also have UPM
(e.g. 8360) to configure and use their UPM in u-boot.

Signed-off-by: Richard Retanubun 
Signed-off-by: Kim Phillips