Some boards that have external 16550 UARTs don't have a direct
tie between bi_busfreq and the clock used for the UARTs.  Boards
that do have such a tie should set CFG_NS16550_CLK to be
get_bus_freq(0) -- which most of them do already.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>

Delete the crypto node if not on an E-processor.  If on 8360 or 834x family,
check rev and up-rev crypto node (to SEC rev. 2.4 property values)
if on an 'EA' processor, e.g. MPC8349EA.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

This patch is the first step in cleaning up net/eth.c, by moving Ethernet
initialization to CPU or board-specific code.  Initial implementation is
only on the Freescale TSEC controller, but others will be added soon.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

During 83xx setup the "System I/O configuration register high" gets
overwritten with user defined value if CFG_SICRH is defined.

Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
must keep their reset value regardless of configuration.

On my board (using RGMII) those bits are set after reset - yet it's
unclear where they come from.

The patch keeps both bits on MPC834x and MPC8313.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

to avoid this:

cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
In file included from cpu.c:33:
/home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

Change all code that conditionally operates on high bat
registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS
instead of the myriad ways this is done now.  Define the option
for every config for which high bats are supported (and
enabled by early boot, on parts where they're not always
enabled)

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

This commit gets rid of a huge amount of silly white-space issues.
Especially, all sequences of SPACEs followed by TAB characters get
removed (unless they appear in print statements).

Also remove all embedded "vim:" and "vi:" statements which hide
indentation problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>

The MPC83xx family never have CPM block, so remove it from 83xx.

Signed-off-by: Dave Liu <daveliu@freescale.com>