u-boot.git/cpu/mpc83xx, branch v2009.08

Update Freescale copyrights to remove "All Rights Reserved"

2009-07-29T07:59:22+00:00

"All Rights Reserved" conflicts with the GPL.

Signed-off-by: Kumar Gala

mpc83xx: CONFIG_83XX_GENERIC_PCI is now synonymous with CONFIG_PCI; remove the former

2009-07-27T15:17:54+00:00

Signed-off-by: Kim Phillips

usb: mpc834x: added support of the MPH USB controller in addition to the DR one

2009-07-14T19:53:52+00:00

Signed-off-by: Valeriy Glushkov 
Signed-off-by: Kim Phillips

mpc83xx: USB: fix: access of ehci struct elements

2009-07-09T19:33:15+00:00

It fixes the access to the 'ehci' struct elements for mpc83xx which
should have been taken care of in 4ef01010aa4799c759d75e67007fdd3a38c88c8a
Sorry about that.

Signed-off-by: Vivek Mahajan 
Signed-off-by: Remy Bohmer

83xx: Add support for fsl_dma driver

2009-07-02T16:15:57+00:00

Signed-off-by: Peter Tyser 
Reviewed-by: Ira W. Snyder 
Tested-by: Ira W. Snyder 
Acked-by: Kim Phillips 
Signed-off-by: Kumar Gala

83xx: Replace CONFIG_ECC_INIT_VIA_DDRC references

2009-07-02T16:15:49+00:00

Update 83xx architecture's CONFIG_ECC_INIT_VIA_DDRC references to
CONFIG_ECC_INIT_VIA_DDRCONTROLLER, which other Freescale architectures
use

Signed-off-by: Peter Tyser 
Acked-by: Kim Phillips 
Signed-off-by: Kumar Gala

8xxx: Rename dma_xfer() to dmacpy()

2009-07-02T04:07:47+00:00

Also update dmacpy()'s argument order to match memcpy's and use
phys_addr_t/phy_size_t for address/size arguments

Signed-off-by: Peter Tyser 
Signed-off-by: Kumar Gala

qe: Pass in uec_info struct through uec_initialize

2009-06-12T22:17:02+00:00

The uec driver contains code to hard code configuration information for the uec
ethernet controllers. This patch creates an array of uec_info structures, which
are then parsed by the corresponding driver instance to determine configuration.
It also creates function uec_standard_init() to initialize all UEC interfaces
for 83xx and 85xx.

Signed-off-by: Haiying Wang 
Signed-off-by: Kumar Gala

mpc83xx: USB: Reorganized its support

2009-06-12T18:47:17+00:00

The following patch reorganizes/reworks the USB support for mpc83xx
as under:-

  * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to
    cpu/mpx83xx/cpu_init.c

  * Board specific usb_phy_type is read from the environment

  * Adds USB EHCI specific structure in include/usb/ehci-fsl.h

  * Copyrights revamped in most of the following files

Signed-off-by: Vivek Mahajan 
Signed-off-by: Remy Bohmer

83xx: Replace CONFIG_MPC83[0-9]X with MPC83[0-9]x

2009-06-12T18:47:17+00:00

Use the standard lowercase "x" capitalization that other Freescale
architectures use for CPU defines to prevent confusion and errors

Signed-off-by: Peter Tyser 
Signed-off-by: Kim Phillips