u-boot.git/cpu/mpc86xx/Makefile, branch v2009.01

powerpc: change 86xx SMP boot method

2008-11-04T16:58:50+00:00

We put the bootpg for the secondary cpus into memory and use
BPTR to get to it.  This is a step towards converting to the
ePAPR boot methodology.  Also, the code is written to
deal properly with more than 4GB of RAM.

Signed-off-by: Becky Bruce

FSL DDR: Remove old SPD support from cpu/mpc86xx

2008-08-27T00:06:05+00:00

All 86xx boards have been converted to the new code so we can
remove the old SPD DDR setup code.

Signed-off-by: Kumar Gala

FSL DDR: Add 86xx specific register setting

2008-08-27T00:06:01+00:00

Signed-off-by: Kumar Gala

FSL DDR: Rewrite the FSL mpc8xxx DDR controller setup code.

2008-08-27T00:05:58+00:00

The main purpose of this rewrite it to be able to share the same
initialization code on all FSL PowerPC products that have DDR
controllers.  (83xx, 85xx, 86xx).

The code is broken up into the following steps:
	GET_SPD
	COMPUTE_DIMM_PARMS
	COMPUTE_COMMON_PARMS
	GATHER_OPTS
	ASSIGN_ADDRESSES
	COMPUTE_REGS
	PROGRAM_REGS

This allows us to share more code an easily allow for board specific code
overrides.

Additionally this code base adds support for >4G of DDR and provides a
foundation for supporting interleaving on processors with more than one
controller.

Signed-off-by: James Yang 
Signed-off-by: Jon Loeliger 
Signed-off-by: Becky Bruce 
Signed-off-by: Ed Swarthout 
Signed-off-by: Kumar Gala

86xx: Convert sbc8641d to use libfdt.

2008-02-18T20:01:56+00:00

This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman  embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger

Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.

2007-08-05T22:22:24+00:00

All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c.  In a subsequent patch, this will be
utilized by the 85xx ports as well.

Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.

Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.

Fixed a u16 vendor compiler warning in AHCI driver too.

Signed-off-by: Ed Swarthout 
Signed-off-by: Zhang Wei 
Signed-off-by: Jon Loeliger

Fix "ar" flags in some Makefiles to allow for silent "make -s"

2006-10-27T09:55:21+00:00

Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c

2006-10-19T16:34:11+00:00

in an effort to begin to unify the umpteen FSL I2C drivers that
are all otherwise very similar.

Signed-off-by: Jon Loeliger

Modified makefile for new build mechanism.

2006-09-19T14:34:10+00:00

Signed-off-by: Jon Loeliger

Enable PCIE1 for MPC8641HPCN board

2006-06-27T14:17:59+00:00

Signed-off-by: Jason Jin