u-boot.git/cpu/mpc86xx/cpu.c, branch v1.3.2

86xx: Convert sbc8641d to use libfdt.

2008-02-18T20:01:56+00:00

This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman  embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger

86xx: Add reginfo command

2008-01-24T18:12:56+00:00

Signed-off-by: Becky Bruce

make 8610 board use pixis reset

2007-11-07T20:08:45+00:00

Signed-off-by: Jason Jin

Initial mpc8610hpcd cpu/, README and include/ files.

2007-10-17T20:01:47+00:00

Signed-off-by: Ed Swarthout 
Signed-off-by: Mahesh Jade 
Signed-off-by: Jason Jin 
Signed-off-by: Jon Loeliger

Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx

2007-05-16T22:07:21+00:00

For all practical u-boot purposes, TSECs don't differ throughout the
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.

Signed-off-by: Kim Phillips

mpc86xx; Write MAC address to mac-address and local-mac-address

2007-04-20T19:12:26+00:00

Some device trees have a mac-address property, some have local-mac-address,
and some have both.  To support all of these device trees, ftp_cpu_setup()
should write the MAC address to mac-address and local-mac-address, if they
exist.

Signed-off-by: Timur Tabi 
Signed-off-by: Jon Loeliger

mpc86xx: protect memcpy to bad address if a mac-address is missing from dt

2007-04-20T19:11:38+00:00

Signed-off-by: Kim Phillips 
Signed-off-by: Jon Loeliger

Add PIXIS FPGA support for MPC8641HPCN board.

2007-04-09T19:25:05+00:00

Move the 8641HPCN's PIXIS code to the new directory
board/freescale/common/ as it will be shared by
future boards not in the same processor family.

Write a "pixis_reset" command that utilizes the FPGA
reset sequencer to support alternate soft-reset options
such as using the "alternate" flash bank, enabling
the watch dog, or choosing different CPU frequencies.

Add documentation for the pixis_reset to README.mpc8641hpcn.

Signed-off-by: Haiying Wang 
Signed-off-by: Jon Loeliger

Handle 86xx SVR values according to the new Reference Manual.

2006-09-14T13:40:36+00:00

Both 8641 and 8641D have SVR == 0x8090, and are distinguished
by the byte in bits 16-23 instead.
Thanks to Jason Jin for noticing.

Signed-off-by: Jon Loeliger

General indent and whitespace cleanups.

2006-08-22T17:06:18+00:00