The tsec driver contains a hard-coded array of configuration information
for the tsec ethernet controllers.  We create a default function that works
for most tsecs, and allow that to be overridden by board code.  It creates
an array of tsec_info structures, which are then parsed by the corresponding
driver instance to determine configuration.  Also, add regs, miiregs, and
devname fields to the tsec_info structure, so that we don't need the kludgy
"index" parameter.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Signed-off-by: Wolfgang Denk <wd@denx.de>

The watchdog on 8610 board is enabled by setting sw[6]
to on. Once enabled, the watchdog can not be disabled
by software. So feed the dog in u-boot is necessary for
normal operation.

Signed-off-by: Jason Jin <Jason.jin@freescale.com>

This patch is the first step in cleaning up net/eth.c, by moving Ethernet
initialization to CPU or board-specific code.  Initial implementation is
only on the Freescale TSEC controller, but others will be added soon.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

FSL has taken to using SVR[16:23] as an SOC sub-version field.  This
is used to distinguish certain variants within an SOC family.  To
account for this, we add the SVR_SOC_VER() macro, and update the SVR_*
constants to reflect the larger value.  We also add SVR numbers for all
of the current variants.  Finally, to make things neater, rather than
use an enormous switch statement to print out the CPU type, we create
and array of SVR/name pairs (using a macro), and print out the CPU name
that matches the SVR SOC version.

Signed-off-by: Andy Fleming <afleming@freescale.com>

This is the proper fix for a missing closing brace in the function
ft_cpu_setup() noticed by joe.hamman <at> embeddedspecialties.com.
The ft_cpu_setup() function in mpc8641hpcn.c should have been
removed earlier as it was under the obsolete CONFIG_OF_FLAT_TREE,
but was missed.  Only, the sbc8641d was nominally still using it.
It all got ripped out, and the funcality that was in ft_board_setup()
was refactored to remove the CPU portions into the new file
cpu/mpc86xx/fdt.c instead.  Make sbc8641d use this now.

Based loosely on an original patch from joe.hamman@embeddedspecialties.com

Signed-off-by: Jon Loeliger <jdl@freescale.com>

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

Signed-off-by: Jason Jin <Jason.jin@freescale.com>