u-boot.git/cpu/mpc8xx, branch LABEL_2004_05_29_1850

Patch by Klaus Heydeck, 12 May 2004:

2004-05-12T22:54:36+00:00

Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
various changes to KUP4 board specific files

* Fix config option spelling in PM520 config file

2004-05-05T08:31:53+00:00

* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
  patches by Pantelis Antoniou, 30 Mar 2004)

* Fix minor NAND JFFS2 related issue

2004-05-03T20:45:30+00:00

* Fixes for SL811 USB controller:
  - implement workaround for broken memory stick
  - improve error handling

* Increase packet send timeout to 10 ms in cpu/mpc8xx/scc.c to better
  cope with congested networks.

Clean up the TQM8xx_YYMHz configurations; allow to use the same

2004-04-24T23:23:30+00:00

binary image for all clock frequencies. Implement run-time
optimization of flash access timing based on the actual bus
frequency.

* Cleanup, minor fixes

2004-04-18T17:39:38+00:00

* Patch by Rune Torgersen, 16 Apr 2004:
  LBA48 fixes

* Patches by Pantelis Antoniou, 16 Apr 2004:
  - Fix some compile problems;
    add "once" functionality for the netretry variable

Patches by Pantelis Antoniou, 16 Apr 2004:

2004-04-18T10:13:26+00:00

- add support for a new version of an Intracom board and fix
  various other things on others.
- add verify support to the crc32 command (define
  CONFIG_CRC32_VERIFY to enable it)
- fix FEC driver for MPC8xx systems:
  1. fix compilation problems for boards that use dynamic
     allocation of DPRAM
  2. shut down FEC after network transfers
- HUSH parser fixes:
  1. A new test command was added. This is a simplified version of
     the one in the bourne shell.
  2. A new exit command was added which terminates the current
     executing script.
  3. Fixed handing of $? (exit code of last executed command)

Patches by Pantelis Antoniou, 30 Mar 2004:

2004-04-15T21:31:56+00:00

Improve and fix various things in the MPC8xx FEC driver:
1. The new 87x and 88x series of processors have two FECs,
   and the new driver supports them both.
2. Another change in the 87x/88x series is support for
   the RMII (Reduced MII) interface. However numerous
   changes are needed to make it work since the PHYs
   are connected to the same lines. That means that
   you have to address them correctly over the MII
   interface.

* Patch by Mark Jonas: Remove config.tmp files only when

2004-04-08T22:31:29+00:00

  unconfiguring the board

* Adapt RMU board for bigger flash memory

* Test fix for ethernet problems on MPC5200

Patch by Pierre Aubert, 15 Mar 2004:

2004-03-17T01:13:07+00:00

Fix buffer overflow in IDE identification

* Patch by Pierre Aubert, 11 Mar 2004:

2004-03-14T16:51:43+00:00

  - add bitmap command and splash screen support in cfb console
  - add [optional] origin in the bitmap display command

* Patch by Travis Sawyer, 11 Mar 2004:
  Fix ocotea board early init interrupt setup.

* Patch by Thomas Viehweger, 11 Mar 2004:
  Remove redundand code; add  PCI-specific bits to include/mpc8260.h