u-boot.git/cpu/mpc8xx, branch v1.3.3

MPC8xx: Fix libfdt support introduced in commit 77ff7b74

2008-04-02T15:07:20+00:00

fdt.c: In function 'ft_cpu_setup':
fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32'
fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32'
fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet'
fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory'

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Coding Style cleanyp; update CHANGELOG

2008-03-25T23:52:10+00:00

Signed-off-by: Wolfgang Denk

8xx: Update OF support on 8xx

2008-03-25T21:28:34+00:00

This patch does some shifting around of OF support on 8xx.

Signed-off-by: Bryan O'Donoghue

PPC: Use r2 instead of r29 as global data pointer

2008-02-14T21:43:22+00:00

R29 was an unlucky choice as with recent toolchains (gcc-4.2.x) gcc
will refuse to use load/store multiple insns; instead, it issues a
list of simple load/store instructions upon function entry and exit,
resulting in bigger code size, which in turn makes the build for a
few boards fail.

Use r2 instead.

Signed-off-by: Wolfgang Denk

MPC8xx FEC driver: fix compiler warning.

2008-01-13T01:19:13+00:00

Signed-off-by: Wolfgang Denk

Enable SMC microcode relocation patch for SMC1.

2008-01-11T23:33:12+00:00

Signed-off-by: Heiko Schocher

Added support for the mgsuvd board from keymile.

2008-01-11T23:32:34+00:00

Signed-off-by: Heiko Schocher

Fix Ethernet init() return codes

2008-01-10T00:06:02+00:00

Change return values of init() functions in all Ethernet drivers to conform
to the following:

    >=0: Success
    <0:  Failure

All drivers going forward should return 0 on success.  Current drivers that
return 1 on success were left as-is to minimize changes.

Signed-off-by: Ben Warren 
Acked-by: Stefan Roese 
Acked-by: Jean-Christophe PLAGNIOL-VILLARD 
Acked-by: Kim Phillips 
Acked-by: Haavard Skinnemoen 
Acked-By: Timur Tabi

Fix and optimize MII operations on FEC (MPC8xx) controllers

2008-01-09T13:52:04+00:00

This patch fixes several issues at least on a MPC885 based system with two
FEC interfaces used in MII mode.

1. PHY discovery should first read PHY_PHYIDR2 register and only then
   PHY_PHYIDR1 like cpu/mpc8xx/fec.c::mii_discover_phy() does it,
   otherwise the values read are wrong. Also notice, that PHY discovery
   cannot work on MPC88x / MPC87x in setups with both FECs active at all
   in its present form, because for both interfaces the registers from FEC
   1 are used to communicate over MII.

2. Remove code duplication for resetting the FEC by isolating it into a
   separate function.

3. Initialize MII on FEC 1 when communicating over FEC 2 in fec_init().

4. Optimize mii_init() to only reset the FEC 1 controller once.

5. Fix a typo in mii_init() using index i instead of j thus potentially
   leading to unpredictable results.

Signed-off-by: Guennadi Liakhovetski

TQM885D: Exchanged SDRAM timing by a more relaxed timing.

2007-12-27T00:59:50+00:00

CAS-Latency=2, Write Recovery Time tWR=2
The max. supported bus frequency is 66 MHz. Therefore, changed
threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz.

Signed-off-by: Martin Krause