u-boot.git/cpu, branch LABEL_2003_09_16_2310

* Fix timeout problems with 1st packet on MPC5200

2003-09-16T17:29:31+00:00

Disable MPC5200 bus pipelining as workaround for bus contention

2003-09-16T17:20:34+00:00

* Modify XLB arbiter priorities on MPC5200 so all devices use same

2003-09-16T17:06:05+00:00

  priority; configure critical interrupts to be handled like external
  interrupts

Make IPB clock on MGT5100/MPC5200 configurable in board config file;

2003-09-16T11:39:10+00:00

go back to 66 MHz for stability

* Patch by Gleb Natapov, 14 Sep 2003:

2003-09-14T19:08:39+00:00

  enable watchdog support for all MPC824x boards that have a watchdog

* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
  "Non-octet Aligned Frame" errors we see at 100 Mbps

* Patch by Sharad Gupta, 14 Sep 2003:
  fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])

* Patch by David M�ller, 13 Sep 2003:

2003-09-13T19:01:12+00:00

  various changes to VCMA9 board specific files

* Add I2C support for MGT5100 / MPC5200

PPC405EP: set vendor id.

2003-09-12T08:52:09+00:00

Disable memory controller before setting first values.

2003-09-12T08:49:58+00:00

* Patch by Gary Jennejohn, 11 Sep 2003:

2003-09-11T19:48:06+00:00

  - allow for longer timeouts for USB mass storage devices

* Patch by Denis Peter, 11 Sep 2003:
  - fix USB data pointer assignment for bulk only transfer.
  - prevent to display erased directories in FAT filesystem.

* Change output format for NAND flash - make it look like for other
  memory, too

* Patches by Denis Peter, 9 Sep 2003:

2003-09-10T22:30:53+00:00

  add FAT support for IDE, SCSI and USB

* Patches by Gleb Natapov, 2 Sep 2003:
  - cleanup of POST code for unsupported architectures
  - MPC824x locks way0 of data cache for use as initial RAM;
    this patch unlocks it after relocation to RAM and invalidates
    the locked entries.

* Patch by Gleb Natapov, 30 Aug 2003:
  new I2C driver for mpc107 bridge. Now works from flash.

* Patch by Dave Ellis, 11 Aug 2003:
  - JFFS2: fix typo in common/cmd_jffs2.c
  - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
  - JFFS2: remove node version 0 warning
  - JFFS2: accept JFFS2 PADDING nodes
  - SXNI855T: add AM29LV800 support
  - SXNI855T: move environment from EEPROM to flash
  - SXNI855T: boot from JFFS2 in NOR or NAND flash

* Patch by Bill Hargen, 11 Aug 2003:
  fixes for I2C on MPC8240
  - fix i2c_write routine
  - fix iprobe command
  - eliminates use of global variables, plus dead code, cleanup.