u-boot.git/cpu, branch LABEL_2004_04_23_2240

* Temporarily disabled John Kerl's extended MII command code because

2004-04-18T23:32:11+00:00

  "miivals.h" is missing

* Patches by Mark Jonas, 13 Apr 2004:
  - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
  - Add sync instructions to IceCube SDRAM init code
  - Move SDRAM chip constants into seperate include files
  - Unify DDR and SDR initialization code
  - Unify all IceCube (Lite5xxx) target names

* Patch by Dan Malek, 07 Apr 2004:

2004-04-18T21:45:42+00:00

  - Add support for RPC/STx GP3, Motorola 8560 board
  - Update 85xx TSEC driver so it searches MII for first available PHY
    and uses that one.
  - Add functions to support console MII commands.

* Patch by Tolunay Orkun, 07 Apr 2004:
  Move  initialization of bi_iic_fast[]
  from board_init_f() to board_init_r()

* Patch by Yasushi Shoji, 07 Apr 2004:
  Cleanup microblaze port

* Patch by Sangmoon Kim, 07 Apr 2004:
  Add auto SDRAM module detection for Debris board

* Add missing microblaze header files

2004-04-18T21:17:30+00:00

* Patch by Rune Torgersen, 06 Apr 2004:
  - Fix some PCI problems on the MPC8266ADS board
  - Fix the location of some PCI entries in the immap structure

* Patch by Yasushi Shoji, 07 Apr 2004:

2004-04-18T21:13:41+00:00

  - add support for microblaze processors
  - add support for AtmarkTechno "suzaku" board

* Cleanup, minor fixes

2004-04-18T17:39:38+00:00

* Patch by Rune Torgersen, 16 Apr 2004:
  LBA48 fixes

* Patches by Pantelis Antoniou, 16 Apr 2004:
  - Fix some compile problems;
    add "once" functionality for the netretry variable

Patches by Pantelis Antoniou, 16 Apr 2004:

2004-04-18T10:13:26+00:00

- add support for a new version of an Intracom board and fix
  various other things on others.
- add verify support to the crc32 command (define
  CONFIG_CRC32_VERIFY to enable it)
- fix FEC driver for MPC8xx systems:
  1. fix compilation problems for boards that use dynamic
     allocation of DPRAM
  2. shut down FEC after network transfers
- HUSH parser fixes:
  1. A new test command was added. This is a simplified version of
     the one in the bourne shell.
  2. A new exit command was added which terminates the current
     executing script.
  3. Fixed handing of $? (exit code of last executed command)

Patches by Pantelis Antoniou, 30 Mar 2004:

2004-04-15T21:31:56+00:00

Improve and fix various things in the MPC8xx FEC driver:
1. The new 87x and 88x series of processors have two FECs,
   and the new driver supports them both.
2. Another change in the 87x/88x series is support for
   the RMII (Reduced MII) interface. However numerous
   changes are needed to make it work since the PHYs
   are connected to the same lines. That means that
   you have to address them correctly over the MII
   interface.

* Patches by Pantelis Antoniou, 30 Mar 2004:

2004-04-15T18:22:41+00:00

  - add auto-complete support to the U-Boot CLI
  - add support for NETTA and NETPHONE boards; fix NETVIA board

* Patch by Yuli Barcohen, 28 Mar 2004:
  - Add support for MPC8272 family including MPC8247/8248/8271/8272
  - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
  - Change configuration method for MPC8260ADS family

* Patch by Mark Jonas: Remove config.tmp files only when

2004-04-08T22:31:29+00:00

  unconfiguring the board

* Adapt RMU board for bigger flash memory

* Test fix for ethernet problems on MPC5200

* Patch by Stephen Williams, 19 March 2004

2004-03-23T23:20:24+00:00

  Increase speed of sector reads from SystemACE,
  shorten poll timeout and remove a useless reset

* Patch by Tolunay Orkun, 19 Mar 2004:
  Make GigE PHY 1000Mbps Speed/Duplex detection conditional
  (CONFIG_PHY_GIGE)

* Patch by Brad Kemp, 18 Mar 2004:
  prevent machine checks during a PCI scan

* Patch by Pierre Aubert, 18 Mar 2004:
  Fix string cleaning in IDE identification