- Allow to call sysmon function interactively
- PIC on LWMON board needs delay after power-on
- Add missing RSR definitions for MPC8xx
- Improve log buffer handling: guarantee clean reset after power-on
- Add support for EXBITGEN board
- Add support for SL8245 board

  - remove trailing white space, trailing empty lines, C++ comments, etc.
  - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)

* Patches by Kenneth Johansson, 25 Jun 2003:
  - major rework of command structure
    (work done mostly by Michal Cendrowski and Joakim Kristiansen)

  - logdl
  - csb226
  - innokom

* Patch by Pantelis Antoniou, 25 Jun 2003:
  update NetVia with V2 board support

* Patch by Murray Jensen, 24 Jun 2003:
  - make sure to use only U-boot provided header files
  - fix problems with ".rodata.str1.4" section as used by GCC-3.x

  Update for MPC8260ADS board

* Patch by Murray Jensen, 23 Jun 2003:
  - cleanup of GCC 3.x compiler warnings

  add large memory support for MPC8266ADS board

* Patch by Richard Woodruff, 19 June 03:
  - Enabled standard u-boot device abstraction for ARM
  - Enabled console device for ARM
  - Initilized bi_baudrate for ARM

* Patch by Bill Hargen, 23 Apr 2003:
  fix byte order for 824x I2C addresses (write op)

- hymod update
- cleanup (especially for gcc-3.x compilers)

added CONFIG_750FX support for IBM 750FX processors

- Hymod board database mods: add "who" field and new xilinx chip types
- provide new "init_cmd_timeout()" function so code external to
  "common/main.c" can use the "reset_cmd_timeout()" function before
  entering the main loop
- add DTT support for adm1021 (new file dtt/adm1021.c; config
  slightly different. see include/configs/hymod.h for an example
  (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
  CFG_DTT_ADM1021 defined)
- add new "eeprom_probe()" function which has similar args and
  behaves in a similar way to "eeprom_read()" etc.
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
  function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
- gdbtools copyright update
- ensure that set_msr() executes the "sync" and "isync" instructions
  after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
- 8260 I/O ports fix: Open Drain should be set last when configuring
- add SIU IRQ defines for 8260
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
  config.mk to allow board configurations to override the GNU
  linker script, selected via the LDSCRIPT, make variable, and to
  give an initial value to the OBJCFLAGS make variable
- 8260 i2c enhancement:
  o correctly extends the timeout depending on the size of all
    queued messages for both transmit and receive
  o will not continue with receive if transmit times out
  o ensures that the error callback is done for all queued tx
    and rx messages
  o correctly detects both tx and rx timeouts, only delivers one to
    the callback, and does not overwrite an earlier error
  o logic in i2c_probe now correct
- add "vprintf()" function so that "panic()" function can be
  technically correct
- many Hymod board changes

  - rewrite of the S3C24X0 register definitions stuff
  - "driver" for the built-in S3C24X0 RTC

* Patches by Yuli Barcohen, 12 Jun 2003:
  - Add MII support and Ethernet PHY initialization for MPC8260ADS board
  - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
    configuration word supplied by FPGA on some MPC8260ADS boards

* Patch by Pantelis Antoniou, 10 Jun 2003:
  Unify status LED interface