u-boot.git/disk/Kconfig, branch v2018.11

spl: disk: usb: Add dependencies to sprintf/strto*

2018-04-28T22:32:24+00:00

If SPL serial support is disabled nothing brings in sprintf, snprintf
or simple_strtoul:

  env/built-in.o: In function `regex_callback':
  env/attr.c:128: undefined reference to `sprintf'
  disk/built-in.o: In function `blk_get_device_by_str':
  disk/part.c:386: undefined reference to `simple_strtoul'
  disk/part.c:395: undefined reference to `simple_strtoul'
  disk/built-in.o: In function `blk_get_device_part_str':
  disk/part.c:522: undefined reference to `simple_strtoul'
  disk/built-in.o: In function `part_set_generic_name':
  disk/part.c:704: undefined reference to `sprintf'
  drivers/built-in.o: In function `init_peripheral_ep':
  drivers/usb/musb-new/musb_gadget.c:1826: undefined reference to `sprintf'
  drivers/built-in.o: In function `musb_core_init':
  drivers/usb/musb-new/musb_core.c:1451: undefined reference to `snprintf'

Add those dependencies here.

Signed-off-by: Alex Kiernan

part: Disable CONFIG_SPL_ISO_PARTITION by default

2018-04-16T22:45:35+00:00

We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
could load distro images that usually get shipped as iso images. These images
usually come with a board agnostic boot environment.

However, there is very little point in having ISO support enabled (for anyone
really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
is board specific. So the fact that we enable ISO support in U-Boot proper does
not mean at all that we want ISO support in U-Boot SPL.

Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
all those default configs that disabled SPL ISO support.

Signed-off-by: Alexander Graf

Convert LIB_UUID to Kconfig

2018-02-09T00:08:39+00:00

config_fallback.h has some logic that checks a variety of options
and selects LIB_UUID if it hasn't already been selected.  This
will all LIB_UUID in Kconfig and select this option for the list
of options to allow us to remove the logic from fallbacks

Signed-off-by: Adam Ford

part: efi: Add default number of partition entries for sunxi

2017-12-07T15:24:31+00:00

The SPL must be located at 8kB (16 sectors) offset. That's right in the
middle of the GPT, so we need to define a smaller amount of partitions to
accomodate for that location.

Reviewed-by: Andre Przywara 
Signed-off-by: Maxime Ripard

part: efi: Add a Kconfig option for the number of partition entries

2017-12-07T15:24:31+00:00

On some SoCs, the SPL needs to be located right in the middle of the GPT
partition entries.

One way to work around that is to create partition entries for a smaller
number of partitions to accomodate with where the SPL will be. Create a
Kconfig option to allow to do that.

Reviewed-by: Andre Przywara 
Reviewed-by: Tom Rini 
Signed-off-by: Maxime Ripard

SPARC: Remove

2017-04-05T17:52:20+00:00

The SPARC architecture is currently unmaintained, remove.

Cc: Francois Retief 
Signed-off-by: Tom Rini

part_efi: support padding between the GPT header and partition entries

2017-03-20T22:04:18+00:00

Some architectures require their SPL loader at a fixed address within
the first 16KB of the disk. To avoid an overlap with the partition
entries of the EFI partition table, the first safe offset (in bytes,
from the start of the device) for the entries can be set through
CONFIG_EFI_PARTITION_ENTRIES_OFF (via Kconfig)

When formatting a device with an EFI partition table, we may need to
leave a gap between the GPT header (always in LBA 1) and the partition
entries. The GPT header already contains a field to specify the
on-disk location, which has so far always been set to LBA 2. With this
change, a configurable offset will be translated into a LBA address
indicating where to put the entries.

Now also allows an override via device-tree using a config-node (see
doc/device-tree-bindings/config.txt for documentation).

Tested (exporting an internal MMC formatted with this) against Linux,
MacOS X and Windows.

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass 
[trini: __maybe_unused on config_offset to avoid warning]
Signed-off-by: Tom Rini

disk: convert CONFIG_PARTITION_TYPE_GUID to Kconfig

2017-01-28T13:48:04+00:00

Signed-off-by: Patrick Delaunay 
Signed-off-by: Patrick Delaunay

cmd, disk: convert CONFIG_PARTITION_UUIDS, CMD_PART and CMD_GPT

2017-01-28T13:48:03+00:00

We convert CONFIG_PARTITION_UUIDS to Kconfig first.  But in order to cleanly
update all of the config files we must also update CMD_PART and CMD_GPT to also
be in Kconfig in order to avoid complex logic elsewhere to update all of the
config files.

Signed-off-by: Patrick Delaunay 
Signed-off-by: Patrick Delaunay 
Signed-off-by: Tom Rini

disk: convert CONFIG_EFI_PARTITION to Kconfig

2017-01-28T13:47:42+00:00

Signed-off-by: Patrick Delaunay 
Signed-off-by: Patrick Delaunay