u-boot.git/disk/Kconfig, branch v2024.04

disk: Use BOOT_DEFAULTS instead of DISTRO_DEFAULTS

2023-07-17T19:38:11+00:00

Set default y based on common BOOT_DEFAULTS instead of DISTRO_DEFAULTS.

No change is intended, affected options is already implied for DISTRO
and BOOTSTD due to BOOT_DEFAULTS imply DOS_PARTITION (USB_STORAGE),
EFI_PARTITION and ISO_PARTITION.

Fixes: a0c739c184ca ("boot: Create a common BOOT_DEFAULTS for distro and bootstd")
Signed-off-by: Jonas Karlman 
Reviewed-by: Simon Glass

lib: Add an SPL config for LIB_UUID

2023-03-02T22:45:58+00:00

This is selected by PARTITION_UUIDS which has a separate option for SPL.
Add an SPL option for LIB_UUID also, so that we can keep them consistent.

Also add one for PARTITION_TYPE_GUID to avoid a build error in part_efi.c
which wants to call a uuid function in SPL.

Signed-off-by: Simon Glass

disk: Correct help for TPL_PARTITIONS

2022-09-16T15:05:00+00:00

Fix a few typos in this help text. Fix a typo in SPL_PARTITIONS while
we are here.

Signed-off-by: Simon Glass

arch: mvebu: Disable by default unused peripherals in SPL

2022-07-21T08:14:04+00:00

SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and
therefore support for other binary formats is not required to be present in
SPL. Boot source of proper U-Boot is defined by compile time options and
therefore it is not required to enable all possible and unused peripherals
in SPL by default.

This change decrease size of SPL binaries.

Signed-off-by: Pali Rohár 
Reviewed-by: Stefan Roese

disk: don't compile in partition support for spl/tpl if not really necessary

2022-04-23T20:05:34+00:00

Under the current Kconfigs, disk/part.c will be compiled in even if none of
partition table types are enabled. This will lead to the size growth of SPL
/TPL code.

With this patch, CONFIG_PARTITIONS is selected only if, at least, one of
CONFIG_*_PARTITION is enabled.

Signed-off-by: AKASHI Takahiro

disk: Add an option for partitions in SPL

2022-03-25T20:42:40+00:00

In some cases we do not want to enable partition support in SPL. Add an
option to allow this.

Signed-off-by: Simon Glass

rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA

2020-05-15T18:47:35+00:00

Have this symbol follow the pattern of all other such symbols.

Signed-off-by: Trevor Woerner

sunxi: Move common defconfig options to Kconfig

2020-03-18T12:55:00+00:00

Some config symbols are found in *almost* every _defconfig file for
Allwinner boards, because those options are actually a platform choice,
and not a per-board decision.
Some of these options are older, some have recently been added.

Move those options to be set for all Allwinner boards in their
respective Kconfig files.

The rationales are as follows:
- NR_DRAM_BANKS: All Allwinner SoC map DRAM at one contiguous region of
  address space only, starting at 1 GB. So it's always one bank.
- SPL_{DOS,EFI}_PARTITION: The Allwinner SPL does only support raw MMC
  accesses, we don't care about filesystems or partitions in there, so
  there is no need to define those symbols at all.
- USE_PREBOOT: We start USB early when a keyboard is configured, using the
  preboot env variable, so we need to set this variable.
- SYS_RELOC_GD_ENV_ADDR: We don't specify any ENV_ADDR, so need this
  symbol to be set (according to 8d8ee47e03e).
- SYS_USB_EVENT_POLL_VIA_INT_QUEUE: According to commit eab9433aa55428,
  specifying this reduces the latency of the USB keyboard handling, so
  this was formerly enabled in config headers for all Allwinner boards.

Signed-off-by: Andre Przywara 
Acked-by: Maxime Ripard 
Tested-by: Jagan Teki  # Amarula A64-Relic
Reviewed-by: Jagan Teki

spl: disk: usb: Add dependencies to sprintf/strto*

2018-04-28T22:32:24+00:00

If SPL serial support is disabled nothing brings in sprintf, snprintf
or simple_strtoul:

  env/built-in.o: In function `regex_callback':
  env/attr.c:128: undefined reference to `sprintf'
  disk/built-in.o: In function `blk_get_device_by_str':
  disk/part.c:386: undefined reference to `simple_strtoul'
  disk/part.c:395: undefined reference to `simple_strtoul'
  disk/built-in.o: In function `blk_get_device_part_str':
  disk/part.c:522: undefined reference to `simple_strtoul'
  disk/built-in.o: In function `part_set_generic_name':
  disk/part.c:704: undefined reference to `sprintf'
  drivers/built-in.o: In function `init_peripheral_ep':
  drivers/usb/musb-new/musb_gadget.c:1826: undefined reference to `sprintf'
  drivers/built-in.o: In function `musb_core_init':
  drivers/usb/musb-new/musb_core.c:1451: undefined reference to `snprintf'

Add those dependencies here.

Signed-off-by: Alex Kiernan

part: Disable CONFIG_SPL_ISO_PARTITION by default

2018-04-16T22:45:35+00:00

We enabled CONFIG_ISO_PARTITION by default for distro boot, so that U-Boot
could load distro images that usually get shipped as iso images. These images
usually come with a board agnostic boot environment.

However, there is very little point in having ISO support enabled (for anyone
really) in SPL, as the whole idea of SPL is to load U-Boot proper which again
is board specific. So the fact that we enable ISO support in U-Boot proper does
not mean at all that we want ISO support in U-Boot SPL.

Hence, let's remove the Kconfig dependency. Along the way, let's also clean up
all those default configs that disabled SPL ISO support.

Signed-off-by: Alexander Graf