u-boot.git/disk, branch v2010.06-rc3

common: delete CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL

2009-12-08T21:14:07+00:00

There is more and more usage of printing 64bit values,
so enable this feature generally, and delete the
CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL
defines.

Signed-off-by: Heiko Schocher

part_dos: check status flags of partitions

2009-10-18T20:50:21+00:00

Only read partitions which have 0x00 or 0x80 set in their status field.
All others are invalid.

Signed-off-by: Daniel Mack

Conditionally perform common relocation fixups

2009-10-03T08:17:57+00:00

Add #ifdefs where necessary to not perform relocation fixups.  This
allows boards/architectures which support relocation to trim a decent
chunk of code.

Note that this patch doesn't add #ifdefs to architecture-specific code
which does not support relocation.

Signed-off-by: Peter Tyser

Partition support: remove newline from partition name

2009-08-09T20:52:38+00:00

Remove bogus newline character that got added to the .name field of
the disk_partition_t structure.

Signed-off-by: Wolfgang Denk

IDE: bail out of dev_print() for unknown device types

2009-05-15T20:30:13+00:00

Commit 574b319512 introduced a subtle bug by mixing a list of tests
for "dev_desc->type" and "dev_desc->if_type" into one switch(), which
then mostly did not work because "dev_desc->type" cannot take any
"IF_*" type values. A later fix in commit 8ec6e332ea changed the
switch() into testing "dev_desc->if_type", but at this point the
initial test for unknown device types was completely lost, which
resulted in output like that for IDE ports without device attached:

  Device 1: Model:  Firm:  Ser#:
            Type: # 1F #
            Capacity: not available

This patch re-introduces the missing test for unknown device types.

Signed-off-by: Wolfgang Denk 
Cc: Stefan Roese 
Cc: Detlev Zundel 
Tested-by: Stefan Roese

mflash: Initial mflash support

2009-04-03T21:47:06+00:00

Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
   confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim

vsprintf: pull updates from Linux kernel

2009-03-20T21:39:09+00:00

This brings in support for the %p modifier which allows us to easily print
out things like ip addresses, mac addresses, and pointers.

It also converts the rarely used 'q' length modifier to the common 'L'
modifier when dealing with quad types.

While this new code is a bit larger (~1k .text), most of it should be made
up by converting the existing ip/mac address code to use format modifiers.

Signed-off-by: Mike Frysinger

disk: convert part_* files to COBJ-$(CONFIG_XXX) style

2009-02-17T23:50:51+00:00

Move the CONFIG_XXX out of the part_XXX.c file and into Makefile to
avoid pointless compiles.

Signed-off-by: Mike Frysinger

part_efi: Fix partition size calculation due to inclusive ending LBA.

2009-01-27T22:03:57+00:00

The ending LBA is inclusive. Hence, the partition size should be
((ending-LBA + 1) - starting-LBA) to get the proper partition size.

This is confirmed against the results from the parted tool.
(e.g. use parted /dev/sda -s unit S print) and observe the size.

Signed-off-by: Richard Retanubun

Coding Style cleanup, update CHANGELOG

2008-11-02T15:14:22+00:00

Signed-off-by: Wolfgang Denk