u-boot.git/doc/README.marvell, branch master

Revert "arm64: dts: a3720: add support for espressobin with populated emmc"

2020-12-07T06:11:37+00:00

This reverts commit f1a43c84a960265309fa8365759de271a70c5a7e.

arm64: dts: a3720: add support for espressobin with populated emmc

2020-10-14T05:56:17+00:00

Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for
emmc, since our dtsi is still based on downstream and sdhc0 is used for
the sd card.

Signed-off-by: Andre Heider

arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

2020-10-01T08:43:43+00:00

Some Espressobin boards got assigned more than one MAC address. Update
instructions how to correctly store and preserve all MAC addresses.

Signed-off-by: Pali Rohár 
Reviewed-by: Andre Heider

arm: mvebu: Espressobin: Update README.marvell file

2020-08-31T12:45:53+00:00

Include information about permanent ethernet MAC address and add link how
to build ATF as U-Boot on Espressobin cannot be flashed without ATF.

Signed-off-by: Pali Rohár 
Reviewed-by: Stefan Roese

arm64: mvebu: use single defconfig for Armada8K development boards

2017-07-12T04:57:55+00:00

Currently, Marvell Armada8k development board use 3 different
defconfigs:
        mvebu_db-88f7040-nand_defconfig
        mvebu_db-88f7040_defconfig
        mvebu_db-88f8040_defconfig
Having 3 different defconfigs makes maintenance difficult.

This patch removes the defconfigs mentioned above and introduce
a new defconfig which represents the Armada8k family.

NOTE:
In order not to break automatic tools compilation,
a default device-tree is set in the defconfig (armada-8040-db).
However, when compiling u-boot, the user MUST explicitly export
the DEVICE_TREE for the requested board because using A80x0
device-tree on A70x0 might break the device.

For more information, refer to "doc/README.marvell" (intoduced
in this patch).

Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8
Signed-off-by: Igal Liberman 
Signed-off-by: Stefan Roese