u-boot.git/doc/README.marvell, branch next

doc: Switch from setenv to env set

2026-07-27T16:50:27Z

The "env" command is the recommended environment management command, its "set" subcommand is the equivalent replacement for legacy "setenv" command. Update the documentation to use the contemporary "env set" command instead of legacy "setenv" command. Note that the "setenv" command is unlikely to be removed from U-Boot in the near future due to it being integral part of the command line ABI. Implemented using: $ sed -i 's@\@env set@g' $(git grep -li '\' doc/) README Signed-off-by: Marek Vasut

Revert "arm64: dts: a3720: add support for espressobin with populated emmc"

2020-12-07T06:11:37Z

This reverts commit f1a43c84a960265309fa8365759de271a70c5a7e.

arm64: dts: a3720: add support for espressobin with populated emmc

2020-10-14T05:56:17Z

Import armada-3720-espressobin-emmc.dts from Linux, but use sdhc1 for emmc, since our dtsi is still based on downstream and sdhc0 is used for the sd card. Signed-off-by: Andre Heider

arm: mvebu: Espressobin: Instructions for more MAC addresses in README.marvell

2020-10-01T08:43:43Z

Some Espressobin boards got assigned more than one MAC address. Update instructions how to correctly store and preserve all MAC addresses. Signed-off-by: Pali Rohár Reviewed-by: Andre Heider

arm: mvebu: Espressobin: Update README.marvell file

2020-08-31T12:45:53Z

Include information about permanent ethernet MAC address and add link how to build ATF as U-Boot on Espressobin cannot be flashed without ATF. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese

arm64: mvebu: use single defconfig for Armada8K development boards

2017-07-12T04:57:55Z

Currently, Marvell Armada8k development board use 3 different defconfigs: mvebu_db-88f7040-nand_defconfig mvebu_db-88f7040_defconfig mvebu_db-88f8040_defconfig Having 3 different defconfigs makes maintenance difficult. This patch removes the defconfigs mentioned above and introduce a new defconfig which represents the Armada8k family. NOTE: In order not to break automatic tools compilation, a default device-tree is set in the defconfig (armada-8040-db). However, when compiling u-boot, the user MUST explicitly export the DEVICE_TREE for the requested board because using A80x0 device-tree on A70x0 might break the device. For more information, refer to "doc/README.marvell" (intoduced in this patch). Change-Id: I98515b6306498358f3722ecf7ac4c87f236ebbd8 Signed-off-by: Igal Liberman Signed-off-by: Stefan Roese