Add building and usage instructions for SPL. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org> Link: https://patch.msgid.link/20251126-spl-gx-v5-10-6cbffb2451ca@postmarketos.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The previous instructions resulted in a bootloader that wouldn't fit in an MBR gap. I have updated the docs based on upstream's build process. Signed-off-by: Baltazár Radics <baltazar.radics@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250110111335.9221-1-baltazar.radics@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add support for the Libre Computer aml-s905d3-cc "Solitude" board: https://libre.computer/products/aml-s905d3-cc/ The Solitude board has a Credit Card form factor, similar to the the previous "Le Potato" card, but with the Amlogic A311D SoC, MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C connector replacing the microUSB one for power and USB 2.0. The board has an embedded SPI NOR flash, and EFI Capsule support is added. The GUID is dynamically generated for the board, to get it: => efidebug capsule esrt ======================================== ESRT: fw_resource_count=1 ESRT: fw_resource_count_max=1 ESRT: fw_resource_version=1 [entry 0]============================== ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success ======================================== On the host (with the aml_encrypt_g12a result binary): $ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap On the board (from USB disk containing u-boot.cap at root): => load usb 0:1 $kernel_addr_r u-boot.cap => efidebug capsule update $kernel_addr_r The binary will then be flashed on the SPI. Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add support for the Libre Computer aml-a311d-cc "Alta" board: https://libre.computer/products/aml-a311d-cc/ The Alta board has a Credit Card form factor, similar to the the prvevious "Le Potato" card, but with the Amlogic A311D SoC, MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C connector replacing the microUSB one for power and USB 2.0. The board has an embedded SPI NOR flash, and EFI Capsule support is added. The GUID is dynamically generated for the board, to get it: => efidebug capsule esrt ======================================== ESRT: fw_resource_count=1 ESRT: fw_resource_count_max=1 ESRT: fw_resource_version=1 [entry 0]============================== ESRT: fw_class=17E07D9D-4D91-53F4-8780-1D91F279C1A5 ESRT: fw_type=unknown ESRT: fw_version=0 ESRT: lowest_supported_fw_version=0 ESRT: capsule_flags=0 ESRT: last_attempt_version=0 ESRT: last_attempt_status=success ======================================== On the host (with the aml_encrypt_g12a result binary): $ eficapsule --guid 17E07D9D-4D91-53F4-8780-1D91F279C1A5 -i 1 u-boot.bin u-boot.cap On the board (from USB disk containing u-boot.cap at root): => load usb 0:1 $kernel_addr_r u-boot.cap => efidebug capsule update $kernel_addr_r The binary will then be flashed on the SPI. Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-1-8915b108840b@linaro.org Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Improove documentation, add new revision. Signed-off-by: Viacheslav Bocharov <adeep@lexina.in> Link: https://lore.kernel.org/r/20240227065551.580199-4-adeep@lexina.in [narmstrong: squashed https://lore.kernel.org/all/20240326082004.1651782-1-adeep@lexina.in/] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add build instructions for the KII Pro set-top box. Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com> Link: https://lore.kernel.org/r/20230507124109.31778-4-vitali64pmemail@protonmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
Add build instructions for the Beelink GT1 Ultimate board. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Karl Chan <exxxxkc@getgoogleoff.me> Link: https://lore.kernel.org/r/8760391a-3506-5ac5-8d55-92c23cccff44@yahoo.com [narmstrong: fixed MAINTAINERS indentation, added doc to index] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add build instructions for the WeTek Hub and WeTek Play2 boards. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-15-christianshewitt@gmail.com [narmstrong: fixed doc build] Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add build docs for the Radxa Zero2 board. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230323143142.780306-12-christianshewitt@gmail.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>