signed_hdmi_imx8m.bin is already signed and has a IVT header. It should not
be put in u-boot-spl-mkimage.signed.bin. Move it to head of flash.bin
following NXP imx-mkimage. Keeping it in u-boot-spl-mkimage.signed.bin also
consumes a lot of TCM space which is not expected.

While moving it to head of flash.bin, other changes are required,
u-boot.itb is put at sector 768 per defconfig, so u-boot.itb binman
offset should be updated and it should be moved out from binman section.

Also binman symbol address are updated, so need to subtract u-boot-spl
image_pos + CONFIG_SPL_TEXT_BASE to find the correct location of ddr phy
firmware.

Because there is 1KB padding in HDMI firmware, use 32KB when burning
flash.bin to sd card.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

U-Boot produces flash.bin as the final boot image when building for
the i.MX95 EVK, but the documentation refers to imx-boot-imx95.bin.

Update the instructions to use flash.bin when copying the image to
the SD card.

Signed-off-by: Fabio Estevam <festevam@nabladev.com>

The imx-oei and imx-sm build systems defaults to:

  TC_VERSION ?= 14.2.rel1

but the documentation still instructs users to download the 13.3 toolchain.
This causes the build to fail because the expected directory name does
not exist.

Update the documentation to reference the 14.2 toolchain to match the build
system default.

Signed-off-by: Fabio Estevam <festevam@nabladev.com>
Acked-by: Peng Fan <peng.fan@nxp.com>

Add support for i.MX952 15x15 lpddr4x board support.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>

Select remoteproc related configs for i.MX95 EVK to support manage CM7
using 'rproc' cmd.
Update doc to show details on starting CM7 using rproc cmd.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add i.MX91 11x11 FRDM Board support.
 - Four ddr scripts included w/o inline ecc feature. Support
   both 1gb and 2gb DDR
 - SDHC/EQOS/I2C/UART supported
 - PCA9451 supported, default nominal drive mode
 - Documentation added.

Signed-off-by: Joseph Guo <qijian.guo@nxp.com>

Add boot support and peripherals like eMMC/SD, UART, I2C, GPIO, ENETC0/1
and PCIE0/1 for iMX95 15x15 LPDDR4X EVK.
Updated doc for build instructions.

Signed-off-by: Ye Li <ye.li@nxp.com>

Add guide on how to use the Remote Processors on i.MX8M and i.MX93.

Update MAINTAINERS to include doc/board/nxp.

Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add board-level code and defconfig for the i.MX943 EVK board, supporting
multiple SOM variants: 19x19 LPDDR5, 19x19 LPDDR4 and 15x15 LPDDR4.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>

Prepare v2025.10-rc5