As the PHYTEC phyCORE-i.MX91 [1] is just another variant of the existing PHYTEC phyCORE-i.MX93 SoM but with i.MX91 SoC populated instead, add it to the existing board-code "phycore_imx93", and rename that board to "phycore_imx91_93" to reflect the dual SoCs support. While at it, also rename and change common files accordingly. This way i.MX91 and i.MX93 SoC variants of the phyCORE SoM share most of the code and documentation without duplication, while maintaining own device-tree and defconfigs for each CPU variant. Supported features: - 1GB LPDDR4 RAM - Debug UART - EEPROM - eMMC - Ethernet - SD-card - USB Product page SoM: [1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-91-93/ Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Add documentation for the PHYTEC phyCORE-AM68x/TDA4x (J721S2 family) SoM. Signed-off-by: Dominik Haller <d.haller@phytec.de> Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Use single make command for compiling blobs and U-Boot. Update the imx firmware version. Signed-off-by: Yannic Moog <y.moog@phytec.de>
OP-TEE configs are enabled by default, change the doc to no longer declare OP-TEE as optional. Also remove CFG_TEE_BENCHMARK as it is no longer present in optee_os. Further, phycore-imx8mm and imx8mm-phygate-tauri-l use different build instructions, so dissolve the common file for building OP-TEE. Reviewed-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add new imx8mp-libra-fpsc board. Bootph tags as well as USB device tree nodes are in u-boot.dtsi for now and will be removed when upstreamed. The Libra i.MX 8M Plus FPSC is a single board computer. It uses an i.MX 8M Plus FPSC [1] System on Module which utilizes the FPSC standard [2]. [1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-imx-8m-plus-fpsc [2] https://www.phytec.eu/en/produkte/system-on-modules/fpsc Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de> Reviewed-by: Teresa Remmet <t.remmet@phytec.de> Tested-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Yannic Moog <y.moog@phytec.de>
Provide a common part for our K3 based boards including general details about environment handling and EFI capsule updates. Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Add instructions on how to build and package OP-TEE for the phycore-imx8mm based boards. The build instructions are identical for phyGATE-Tauri-L and phyBOARD-Polis. Also fix missig '-' for TF-A build instructions. Signed-off-by: Yannic Moog <y.moog@phytec.de>
Add documentation for the phyBOARD-Pollux i.MX 8M Plus on OP-TEE integration. Also add missing '-' to TF-A build instruction while at it. Signed-off-by: Yannic Moog <y.moog@phytec.de>
Garrett Giordano <ggiordano@phytec.com> says:
This patch set adds the phyCORE AM62Ax board support and documenation to
u-boot.
The phyCORE-AM62Ax is a SoM (System on Module) featuring TI's AM62Ax SoC. It can
be used in combination with different carrier boards. This module can come
with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs
from the AM62x family.
A development Kit, called phyBOARD-Lyra is used as a carrier board reference
design around the AM62x SoM.
This series depends on the following two patches:
- [PATCH v2] arm: mach-k3: am62a7: Provide a way to obtain boot device for non SPL
https://lists.denx.de/pipermail/u-boot/2024-October/570156.html
- [PATCH] board: phytec: common: Introduce CONFIG_PHYTEC_K3_DDR_PATCH
https://lists.denx.de/pipermail/u-boot/2024-November/571543.html
Link: https://lore.kernel.org/r/20241118231606.3161665-1-ggiordano@phytec.com
[trini: Fix warning in board/phytec/common/k3/board.c when
CONFIG_EFI_HAVE_CAPSULE_SUPPORT is not enabled]
Signed-off-by: Tom Rini <trini@konsulko.com>
Add documentation for PHYTEC phyCORE-AM62ax SoM. Signed-off-by: Garrett Giordano <ggiordano@phytec.com> Reviewed-by: Wadim Egorov <w.egorov@phytec.de> Reviewed-by: Dhruva Gole <d-gole@ti.com>