U-Boot does work on Qualcomm 845-based Pixel 3 and 3 XL.

Reviewed-by: Simon Glass <simon.glass@canonical.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Link: https://patch.msgid.link/20260108-pixel-config-v4-1-76a2212b69a5@ixit.cz
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

CONFIG_BAUDRATE is not relevant for the QUP driver, and neither is
CONFIG_DEBUG_UART_SKIP_INIT so remove them from the doc.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250924-2025-10-misc-v1-4-7e75842ca714@fairphone.com
Signed-off-by: Casey Connolly <kcxt@postmarketos.org>

I updated the mailmap a while back but it's nice to have authorship
comments adjusted too.

Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

Introducing documentation support for Qualcomm Dragonwing IQ8 QCS8300
board. Documents the build and flashing steps.

Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>

The mkmbn tool isn't available yet, so it's still necessary to use
qtestsign for signing.

Update the docs to describe it, this can be reverted once mkmbn and the
associated tooling is merged.

Link: https://lore.kernel.org/u-boot/20250616162626.247802-1-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

As required e.g. on Fairphone 5, add an example how to use boot image
with header version 2.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-3-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

This command does not work as described in this doc, so replace it with
a regular make with qcom_defconfig, as already used for other
defconfigs.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-2-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

One needs to set CROSS_COMPILE also for the actual compilation, not just
for the kconfig step, otherwise the host arch compiler would be used.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250611-qualcomm-doc-update-v1-1-5cf8cd94974d@fairphone.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

Introducing documentation support for Qualcomm Dragonwing series
boards. Documents the build and flashing steps.

Signed-off-by: Balaji Selvanathan <balaji.selvanathan@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250529154931.1879976-2-quic_bselvana@quicinc.com
[Casey: add dragonwing to board/qualcomm/index.rst]
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>

IPQ5424 expects U-Boot to have MBN version 7 header. The qtestsign tool
presently documented doesn't support v7. Hence update the instructions
to use a different tool that can support both v6 and v7.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250304110105.2762124-4-quic_varada@quicinc.com
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>