<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/doc/board/rockchip, branch next</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.</subtitle>
<id>http://cgit.235523.xyz/u-boot.git/atom/doc/board/rockchip?h=next</id>
<link rel='self' href='http://cgit.235523.xyz/u-boot.git/atom/doc/board/rockchip?h=next'/>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<updated>2026-08-19T12:07:47Z</updated>
<entry>
<title>rockchip: rk3399: Add ROC-PC-PLUS board detection</title>
<updated>2026-08-19T12:07:47Z</updated>
<author>
<name>Fabio Estevam</name>
<email>festevam@nabladev.com</email>
</author>
<published>2026-08-13T17:02:45Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=66ecacc5e4a3afa547244ce9c68937023188340a'/>
<id>urn:sha1:66ecacc5e4a3afa547244ce9c68937023188340a</id>
<content type='text'>
The ROC-RK3399-PC has an MP8859 regulator on I2C7 at address 0x66,
while the ROC-RK3399-PC-PLUS does not. Probe for the regulator in SPL
and use the result to select the matching devicetree from the U-Boot
FIT. Fall back to the original board if the I2C bus cannot be probed.

Build both devicetrees from the existing roc-pc-rk3399_defconfig and
enable the XMC SPI NOR driver used by the Plus variant. Set fdtfile
from the selected U-Boot devicetree so the matching Linux devicetree
is used as well.

Signed-off-by: Fabio Estevam &lt;festevam@nabladev.com&gt;
Reviewed-by: Quentin Schulz &lt;quentin.schulz@cherry.de&gt;
Link: https://patch.msgid.link/20260813170246.110899-3-festevam@gmail.com
Signed-off-by: Quentin Schulz &lt;u-boot@0leil.net&gt;
</content>
</entry>
<entry>
<title>Merge tag 'u-boot-rockchip-2026.10-20260724' of https://git.u-boot-project.org/u-boot/custodians/u-boot-rockchip</title>
<updated>2026-07-27T17:05:58Z</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2026-07-27T17:05:58Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=6fd5e4b7e7a800d1d6b7be6d764477a0ec9582aa'/>
<id>urn:sha1:6fd5e4b7e7a800d1d6b7be6d764477a0ec9582aa</id>
<content type='text'>
- Switched to use upstream pinctrl header include,
- Dropped SDHCI DT properties in U-Boot-specific DT for NanoPi R5 as
  most are present upstream and those which aren't are breaking devices,
- Fixed ECC strength mismatch between reading and writing on non-0
  NAND chips configured as boot medium (nand-is-boot-medium),
- Moved Simon to reviewer for ARM ROCKCHIP,
- Fixed build issue related to GPT capsule support accessing a struct
  member only present when CONFIG_PARTITION_TYPE_GUID is set,
- Added support for new devices:
  - Anbernic RG-DS
  - ROC-RK3588S-PC
</content>
</entry>
<entry>
<title>rockchip: rk3588s: Add support for ROC-RK3588S-PC</title>
<updated>2026-07-23T13:13:12Z</updated>
<author>
<name>Fabio Estevam</name>
<email>festevam@nabladev.com</email>
</author>
<published>2026-07-22T18:40:24Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=15387d5a90af01eb52f0c18cd83e358ba19c0a7d'/>
<id>urn:sha1:15387d5a90af01eb52f0c18cd83e358ba19c0a7d</id>
<content type='text'>
The ROC-RK3588S-PC board is an SBC made by Firefly, based on the RK3588S
SoC.

Add support for it.

Signed-off-by: Fabio Estevam &lt;festevam@nabladev.com&gt;
Reviewed-by: Quentin Schulz &lt;quentin.schulz@cherry.de&gt;
Link: https://patch.msgid.link/20260722184024.1210447-1-festevam@gmail.com
[s/ROC-PC-RK3588S/ROC-RK3588S-PC/ in commit log and diff]
Signed-off-by: Quentin Schulz &lt;u-boot@0leil.net&gt;
</content>
</entry>
<entry>
<title>global: Switch from source.denx.de to git.u-boot-project.org</title>
<updated>2026-07-20T17:13:21Z</updated>
<author>
<name>Tom Rini</name>
<email>trini@konsulko.com</email>
</author>
<published>2026-07-15T17:21:41Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=042e45e026c77227319a426940577856ffe62e7b'/>
<id>urn:sha1:042e45e026c77227319a426940577856ffe62e7b</id>
<content type='text'>
As part of moving our git forge to a new location, update all references
in tree to point to git.u-boot-project.org now.

Signed-off-by: Tom Rini &lt;trini@konsulko.com&gt;
</content>
</entry>
<entry>
<title>board: rockchip: add Anbernic RG-DS</title>
<updated>2026-07-20T17:03:15Z</updated>
<author>
<name>Chris Morgan</name>
<email>macromorgan@hotmail.com</email>
</author>
<published>2026-05-10T21:17:13Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=1998fe69f7e124f0e6b1c6d0c9012a618e91c730'/>
<id>urn:sha1:1998fe69f7e124f0e6b1c6d0c9012a618e91c730</id>
<content type='text'>
Add support for the Anbernic RG-DS dual-screen handheld gaming device.

Link: https://anbernic.com/products/rgds
Signed-off-by: Chris Morgan &lt;macromorgan@hotmail.com&gt;
Reviewed-by: Quentin Schulz &lt;quentin.schulz@cherry.de&gt;
Reviewed-by: Kever Yang &lt;kever.yang@rock-chips.com&gt;
Link: https://patch.msgid.link/20260510211713.68312-1-macroalpha82@gmail.com
[conflict resolution in doc/board/rockchip/rockchip.rst due to commit
 b5deaa71fbe5 ("board: rockchip: Add support for 9Tripod X3568 v4")]
Signed-off-by: Quentin Schulz &lt;u-boot@0leil.net&gt;
</content>
</entry>
<entry>
<title>board: rockchip: Add support for 9Tripod X3568 v4</title>
<updated>2026-07-10T08:52:20Z</updated>
<author>
<name>Coia Prant</name>
<email>coiaprant@gmail.com</email>
</author>
<published>2026-07-09T18:51:01Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=b5deaa71fbe543d11644b6235d466b252587641f'/>
<id>urn:sha1:b5deaa71fbe543d11644b6235d466b252587641f</id>
<content type='text'>
The 9Tripod X3568 v4 is an RK3568-based SBC, just like the RK3568-EVB.
It always uses soldered connections between the X3568CV2/X3568CV3/X3568CV4 core board
and the X3568bv4 I/O board.

The differences between the core boards
- PCB size, layout
- CPU (RK3568B2/RK3568J)
- Memory type (DDR4/LPDDR4/LPDDR4X) and size
- eMMC size
- DSI/EDP resistor values
Although the components vary, they maintain full compatibility.

The X3568 board has multiple hardware revisions, and we currently support v4 (I/O board).

Specification:
- SoC: RockChip RK3568 ARM64 (4 cores)
- eMMC: 16-128 GB
- RAM: 2-16 GB
- Power: DC 12V 2A
- Ethernet: 2x YT8521SC RGMII (10/100/1000 Mbps)
- Wireless radio: 802.11b/g/n/ac/ax dual-band
- LED:
  Power: AlwaysOn
  User: GPIO
- Button:
  VOL+: SARADC/0 &lt;35k µV&gt;
  VOL-: SARADC/0 &lt;450k µV&gt;
  Power/Reset: PMIC RK809
- CAN
  CAN/1: 4-pin (PH 2.0)
- PWM
  PWM/4: Backlight DSI/0 DSI/1
  PWM/7: IR Receiver [may not install]
- UART:
  UART/2: Debug TTL - 1500000 8N1 (1.25mm)
  UART/3: TTL (PH 2.0)
  UART/4: TTL (PH 2.0)
  UART/8: AP6275S Bluetooth
  UART/9: TTL (PH 2.0)
- I2C:
  I2C/0: PMIC RK809
  I2C/1: Touchscreen DSI/0 DSI/1
  I2C/4: Camera
  I2C/5: RTC@51 PCF8563
- I2S:
  I2S/0: miniHDMI Sound
  I2S/1: RK809 Audio Codec
  I2S/3: AP6275S Bluetooth Sound
- SDMMC:
  SDMMC/0: microSD (TF) slot
  SDMMC/2: AP6275S SDIO WiFi card
- Camera: 1x CSI
- Video: miniHDMI / DSI0 (MIPI/LVDS) / DSI1 (MIPI/EDP)
- Audio: miniHDMI / MIC on-board / Speaker / SPDIF / 3.5mm Headphones / AP6275S Bluetooth
- USB:
  USB 2.0 HOST x2
  USB 2.0 HOST x3 (4-pin)
  USB 2.0 OTG x1 (shared with USB 3.0 OTG/HOST) [slot may not install]
  USB 3.0 HOST x1
  USB 3.0 OTG/HOST x1
- SATA: 1x SATA 3.0 with Power/4-pin [slot may not install]
- PCIe: 1x PCIe 3.0 x2 (x4 connector) [power/clock/slot may not install]

Link:
- https://appletsapi.52solution.com/media/X3568V4%E5%BC%80%E5%8F%91%E6%9D%BF%E7%A1%AC%E4%BB%B6%E6%89%8B%E5%86%8C.pdf
- https://blog.gov.cooking/archives/research-ninetripod-x3568-v4-and-flash.html

Signed-off-by: Coia Prant &lt;coiaprant@gmail.com&gt;
Reviewed-by: Quentin Schulz &lt;quentin.schulz@cherry.de&gt;
Link: https://patch.msgid.link/20260709185101.2149485-1-coiaprant@gmail.com
Signed-off-by: Quentin Schulz &lt;u-boot@0leil.net&gt;
</content>
</entry>
<entry>
<title>rockchip: rk3568: Add support for LinkEase EasePi R1</title>
<updated>2026-07-09T18:11:03Z</updated>
<author>
<name>Liangbin Lian</name>
<email>jjm2473@gmail.com</email>
</author>
<published>2026-06-25T12:58:18Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=3a8b3cdd83a3247d23f59f8c75eaf4e917b7f0b6'/>
<id>urn:sha1:3a8b3cdd83a3247d23f59f8c75eaf4e917b7f0b6</id>
<content type='text'>
LinkEase EasePi R1 [1] is a high-performance mini router.

Specification:
- Rockchip RK3568
- 2GB/4GB LPDDR4 RAM
- 16GB on-board eMMC
- 1x M.2 key for 2280 NVMe (PCIe 3.0)
- 1x USB 3.0 Type-A
- 1x USB 2.0 Type-C (for USB flashing)
- 2x 1000 Base-T (native, RTL8211F)
- 2x 2500 Base-T (PCIe, RTL8125B)
- 1x HDMI 2.0 Output
- 12v DC Jack
- 1x Power key connected to PMIC
- 2x LEDs (one static power supplied, one GPIO controlled)

[1] https://doc.linkease.com/zh/guide/easepi-r1/hardware.html

Signed-off-by: Liangbin Lian &lt;jjm2473@gmail.com&gt;
Link: https://patch.msgid.link/20260625125818.18914-2-jjm2473@gmail.com
Signed-off-by: Quentin Schulz &lt;u-boot@0leil.net&gt;
</content>
</entry>
<entry>
<title>rockchip: doc: fix typo evb-rk3288-rk808_defconfig</title>
<updated>2026-07-09T17:03:39Z</updated>
<author>
<name>Johan Jonker</name>
<email>jbx6244@gmail.com</email>
</author>
<published>2026-06-30T14:01:00Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=9b238123825c71cdb871b02e404f1443827fb69b'/>
<id>urn:sha1:9b238123825c71cdb871b02e404f1443827fb69b</id>
<content type='text'>
Use correct defconfig name for evb-rk3288-rk808.

Fixes: f339d6a9c3c2 ("rockchip: Switch remaining rk3288 boards to upstream devicetree")
Signed-off-by: Johan Jonker &lt;jbx6244@gmail.com&gt;
Reviewed-by: Quentin Schulz &lt;quentin.schulz@cherry.de&gt;
Link: https://patch.msgid.link/d0f7ce27-ad87-4910-be25-e867b5af4956@gmail.com
Signed-off-by: Quentin Schulz &lt;u-boot@0leil.net&gt;
</content>
</entry>
<entry>
<title>board: rockchip: Add FriendlyElec NanoPi R76S</title>
<updated>2026-06-08T13:22:19Z</updated>
<author>
<name>Jonas Karlman</name>
<email>jonas@kwiboo.se</email>
</author>
<published>2026-03-10T00:06:05Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=82a5b5f7ca494e643f9bf1454c620dd2b271fdbc'/>
<id>urn:sha1:82a5b5f7ca494e643f9bf1454c620dd2b271fdbc</id>
<content type='text'>
The NanoPi R76S (as "R76S") is an open-sourced mini IoT gateway
device with two 2.5G, designed and developed by FriendlyElec.

Features tested on a NanoPi R76S 2411:
- SD-card boot
- eMMC boot
- LEDs and button
- PCIe/Ethernet
- USB host

Signed-off-by: Jonas Karlman &lt;jonas@kwiboo.se&gt;
Reviewed-by: Kever Yang &lt;kever.yang@rock-chips.com&gt;
</content>
</entry>
<entry>
<title>rockchip: Switch remaining rk3288 boards to upstream devicetree</title>
<updated>2026-03-10T16:07:02Z</updated>
<author>
<name>Johan Jonker</name>
<email>jbx6244@gmail.com</email>
</author>
<published>2026-01-16T22:13:02Z</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=f339d6a9c3c2026e8982b79a94b6724318b170e3'/>
<id>urn:sha1:f339d6a9c3c2026e8982b79a94b6724318b170e3</id>
<content type='text'>
Switch remaining rk3288 boards to upstream devicetree.

Signed-off-by: Johan Jonker &lt;jbx6244@gmail.com&gt;
Reviewed-by: Kever Yang &lt;kever.yang@rock-chips.com&gt;
</content>
</entry>
</feed>
