u-boot.git/doc/board/ti, branch main

Merge patch series "Enable Ethernet boot on SK-AM62A-LP"

2026-07-28T18:30:50Z

Chintan Vankar says: This series enables Ethernet boot on SK-AM62A-LP. The series is based on commit 'a18265f1ccb7' of origin/next branch of U-Boot repo. Link: https://lore.kernel.org/r/20260716080553.2664147-1-c-vankar@ti.com

doc: board: ti: am62ax_sk: Add document for Ethernet boot on AM62x SoC.

2026-07-28T17:58:36Z

Document the procedure to enable Ethernet Boot on SK-AM62A-LP. Tested-by: Anshul Dalal Signed-off-by: Chintan Vankar

doc: Switch from setenv to env set

2026-07-27T16:50:27Z

The "env" command is the recommended environment management command, its "set" subcommand is the equivalent replacement for legacy "setenv" command. Update the documentation to use the contemporary "env set" command instead of legacy "setenv" command. Note that the "setenv" command is unlikely to be removed from U-Boot in the near future due to it being integral part of the command line ABI. Implemented using: $ sed -i 's@\@env set@g' $(git grep -li '\' doc/) README Signed-off-by: Marek Vasut

global: Switch from source.denx.de to git.u-boot-project.org

2026-07-20T17:13:21Z

As part of moving our git forge to a new location, update all references in tree to point to git.u-boot-project.org now. Signed-off-by: Tom Rini

Merge patch series "ti: j7: Update to v0.12.0 of DDR config tool"

2026-06-09T16:26:36Z

Neha Malcom Francis says: Update all DDR configuration DTSIs to the latest auto-generated output of the Sysconfig Tool (DDR Configuration for TDA4x, DRA8x, AM67x, AM68x, AM69x (0.12.00.0000)) [0] The auto-generated files must not be modified, but effort will be taken to change the tool output to adhere to the latest checkpatch.pl rules. J722S and J721E will also be updated in a subsequent series. All the changes have been kernel boot tested and memtester has passed (same as v1, as no functional changes made). [0] https://dev.ti.com/sysconfig/#/start Link: https://lore.kernel.org/r/20251103071035.674604-1-n-francis@ti.com

doc: ti: k3: Add section for DDR configuration

2026-06-09T16:26:21Z

Add a concise section for DDR configuration pointing to the public tool that can be used to generate the configuration DTSI. Signed-off-by: Neha Malcom Francis Reviewed-by: Romain Naour

doc: board: ti: k3: Add fTPM support documentation

2026-05-01T08:30:32Z

Add fTPM support documentation including an overview, configuration steps for RPMB provisioning, OP-TEE TA build instructions, and verification procedure. Signed-off-by: Shiva Tripathi

doc: board: ti: j784s4_evm: Automate BAR address lookup for PCIe Boot

2026-04-17T06:16:03Z

When the J784S4-EVM is configured for PCIe Boot, the Bootloaders are to be written to the address specified by particular BARs. The existing documentation hard-codes the address corresponding to the BAR under the assumption that the Root-Complex transferring the Bootloaders is also a J784S4-EVM. The Root-Complex assigns addresses to the BARs depending on the currently available set of free system addresses. Since the free system addresses vary with the Root-Complex being used, instead of hard-coding the BARs, automate the process of identifying the appropriate BAR in the form of a command to be run by the user on the Root-Complex. Signed-off-by: Siddharth Vadapalli

Merge branch 'next'

2026-04-06T18:16:57Z

doc: board: ti: fix incorrect labels for boot switches

2026-03-27T09:56:01Z

The labels for the boot mode switches were incorreclty documented for some TI boards, this patch fixes them as per the official user guides linked below: AM62x https://www.ti.com/lit/ug/spruj40e/spruj40e.pdf AM62dx https://www.ti.com/lit/ug/sprujg2/sprujg2.pdf AM62ax https://www.ti.com/lit/ug/spruj66b/spruj66b.pdf AM62px https://www.ti.com/lit/ug/spruj40e/spruj40e.pdf AM6254atl https://www.ti.com/lit/ug/spruja1a/spruja1a.pdf Signed-off-by: Anshul Dalal