CFG_WITH_SOFTWARE_PRNG=y was added as an OPTEE argument to workaround
some bugs related to TRNG which have been fixed now[1]. Therefore this
patch drops the redundant argument from the documentation.

[1]: https://github.com/OP-TEE/optee_os/commit/e313f4765fd0478bb66985827441411793433773

Signed-off-by: Anshul Dalal <anshuld@ti.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62

Add initial support for the Toradex Aquila AM69 module.

The Aquila AM69 SoM is based on the TI AM69 SoC from the Jacinto 7
family and is designed for high-end embedded computing, featuring up to
32GB of LPDDR4 and 256GB eMMC storage, extensive multimedia support (3x
Quad CSI, 2x Quad DSI, DisplayPort, 5x Audio I2S/TDM), six Ethernet
interfaces (1x 1G, 4x 2.5G SGMII, 1x 10G), USB 3.2 Host/DRD support, and
a Wi-Fi 7/BT 5.3 module, alongside an RX8130 RTC, I2C EEPROM and
Temperature Sensor, and optional TPM 2.0 module.

Link: https://www.toradex.com/computer-on-modules/aquila-arm-family/ti-am69
Link: https://www.toradex.com/products/carrier-board/aquila-development-board-kit
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Parth Pancholi <parth.pancholi@toradex.com>
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Co-developed-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Franz Schnyder <franz.schnyder@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Fix boot log output not being rendered correctly, fix
it doing the same as done in verdin-am62.rst.

Fixes: b8c43968b801 ("board: toradex: add verdin am62p support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Add support for the Toradex SMARC iMX95.

Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx95
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: João Paulo Gonçalves <joao.goncalves@toradex.com>
Co-developed-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Co-developed-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Co-developed-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>

This adds initial support for the Toradex Verdin AM62P module.

The module consists of an TI AM62P family SoC, a TPS65219 PMIC, a
Gigabit Ethernet PHY, up to 8GB of LPDDR4 RAM, an eMMC, a TLA2024 ADC,
an I2C EEPROM, an RX8130 RTC, plus an optional Bluetooth/Wi-Fi module.

These specific changes adds support for Toradex Verdin AM62P Quad 2GB WB
IT module.

Link: https://www.toradex.com/computer-on-modules/verdin-arm-family/ti-am62p
Link: https://www.toradex.com/products/carrier-board/verdin-development-board-kit
Signed-off-by: Parth Pancholi <parth.pancholi@toradex.com>
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>

Add support for the Toradex SMARC iMX8MP.

Link: https://www.toradex.com/computer-on-modules/smarc-arm-family/nxp-imx-8m-plus
Link: https://www.toradex.com/products/carrier-board/smarc-development-board-kit
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>

* Add documentation to briefly explain the role of TIFS Stub in relevant
  K3 SoC's.
* Shed light on why TIFS Stub isn't package with the DM firmware itself.
* Modify the platform docs wherever the TIFS Stub documentation applies.
* Also, refactor and add a few new labels to help split the firmware
  documentation chunks. This will make it easier to include them one by
  one wherever applicable

Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # verdin-am62

Update and improve the building documentation of Apalis iMX8.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.

Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>

Update and improve the building documentation of Colibri iMX8X.
The following changes were made:
- imx-atf repository changed to nxp-imx GitHub.
- imx-atf branch updated to 'lf_v2.6'.
- imx-seco updated to version 5.8.7.
- nxp-imx mfgtools link updated to GitHub releases.
- General writing improvements.

Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>

Now with the update U-Boot wrappers having been sorted out, document
their usage.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>