u-boot.git/doc/board, branch v2025.01

Merge tag 'fsl-qoriq-2024-12-15' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq

2024-12-15T14:02:46Z

CI: https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq/-/pipelines/23856 - Use strcat to replace sprintf for t208xqds - Fix bootefi for board ls1028a - Various fixes to sl28 board

doc: board: theobroma-systems: fix feature list in introductions

2024-12-15T01:07:54Z

Board introductions have a feature list which isn't formatted properly according to rST and is thus rendered incorrectly. Fix this by adding the missing newlines in the appropriate places. Signed-off-by: Quentin Schulz

doc: coolpi: Fix document style

2024-12-15T01:05:36Z

Add a blank line after title "Specification:" to make it render correctly html. And also remove the useless > in bash code block. Signed-off-by: Andy Yan Reviewed-by: Quentin Schulz

doc: board: sl28: fix table

2024-12-15T01:00:32Z

Convert the table to a correct reST table syntax. Signed-off-by: Michael Walle Signed-off-by: Peng Fan

Merge tag 'u-boot-rockchip-20241111' of https://source.denx.de/u-boot/custodians/u-boot-rockchip

2024-11-11T13:25:25Z

CI: https://source.denx.de/u-boot/custodians/u-boot-rockchip/-/pipelines/23280 - Add board: rk3328: FriendlyElec NanoPi R2S Plus rk3568: Qnap TS433 rk3588: Cool Pi CM5 GenBook - Move rk3399_force_power_on_reset to TPL for puma board;

board: rockchip: Add FriendlyElec NanoPi R2S Plus

2024-11-11T07:14:14Z

The FriendlyElec NanoPi R2S Plus is a single-board computer based on Rockchip RK3328 SoC. It features e.g. 1 GB DDR4 RAM, 32 GB eMMC, SD-card, 2x GbE LAN, optional M.2 SDIO Wi-Fi and 2x USB 2.0 host. Features tested on a NanoPi R2S Plus 2309: - SD-card boot - eMMC boot - Ethernet - USB gadget - USB host Signed-off-by: Jonas Karlman Reviewed-by: Kever Yang

board: rockchip: Add support for rk3588 GenBook

2024-11-11T07:14:14Z

Add support for Cool Pi GenBook, it works as a carrier board connect with CM5 SOM. Specification: - Rockchip RK3588 - LPDDR5X 8/32 GB - eMMC 64 GB - HDMI Type A out x 1 - USB 3.0 Host x 1 - USB-C 3.0 with DisplayPort AltMode - PCIE M.2 E Key for RTL8852BE Wireless connection - PCIE M.2 M Key for NVME connection - eDP panel with 1920x1080 Tested by Armbian boot on USB disk. Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03 Signed-off-by: Andy Yan Reviewed-by: Kever Yang

board: rockchip: add support for Qnap TS433 devices

2024-11-11T07:14:14Z

The Qnap TS433 is a 4-bay NAS based around the RK3568. Two SATA bays are connected to the RK3568's own SATA controllers while the other two are connected to a JMicron SATA controller living on the PCIe bus. It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports. Signed-off-by: Heiko Stuebner Reviewed-by: Kever Yang

doc: qemu-riscv: describe CONFIG_DEBUG_SBI_CONSOLE

2024-11-09T08:56:46Z

In main U-Boot the SBI DBCN extension can be used to supply a debug console. Signed-off-by: Heinrich Schuchardt

x86: coreboot: Allow building an expo for editing CMOS config

2024-11-04T03:27:12Z

Coreboot provides the CMOS layout in the tables it passes to U-Boot. Use that to build an editor for the CMOS settings. Signed-off-by: Simon Glass