u-boot.git/doc/board, branch v2025.07

arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support

2025-06-10T18:50:50Z

Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0 (R8A779G3) SoC. This is a single-board computer with single gigabit ethernet, DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports, micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD, debug UART and JTAG. DT is imported from Linux next commit: a719915e76f2 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support") Signed-off-by: Marek Vasut

doc: board: ti: Add missing firmware for BB-AI64

2025-06-07T12:52:18Z

The details of the sysfw.itb from the R5 build that also needs to be copied as part of the target images is missing, but is included in the image formats a little further down, so add it to the instructions. Signed-off-by: Peter Robinson Reviewed-by: Dhruva Gole Acked-by: Nishanth Menon

doc: thead: lpi4a: Update documentation

2025-05-21T08:49:52Z

Support for eMMC, SD card, GPIO and SPL have been available in LPi4A port. Update the documentation of support status and build instructions. Signed-off-by: Yao Zi Reviewed-by: Leo Yu-Chi Liang

Merge branch 'staging' of https://source.denx.de/u-boot/custodians/u-boot-tegra

2025-05-08T15:22:25Z

ARM: tegra: convert boards to use TEGRA_PRAM

2025-05-08T05:31:13Z

Switch boards that use CFG_PRAM to TEGRA_PRAM. Signed-off-by: Svyatoslav Ryhel

board: lg: star: add Optimus 2X P990 support

2025-05-08T05:30:53Z

The LG Optimus 2X is a touchscreen-based, slate-sized smartphone designed and manufactured by LG that runs the Android operating system. The Optimus 2X features a 4" WVGA display, an Nvidia Tegra 2 dual-core chip, 512 MB of RAM and extendable 8 GB of internal storage. UART-B is default debug port. Tested-by: Ion Agorria Signed-off-by: Svyatoslav Ryhel

board: rockchip: Add LCKFB TaishanPi RK3566 Board

2025-05-08T03:47:20Z

The LCKFB TaishanPi is a single-board computer based on the RK3566 SoC. Specification: - 1/2 Gib RAM - Optinal EMMC - SD-Card - HDMI / MIPI CSI / MIPI DSI - USB 2.0 Host (Type-A) - USB 2.0 Host / OTG (Type-C) - No Ethernet This patch adds U-Boot support for the LCKFB TaishanPi RK3566 board, including: - U-Boot device tree - Default defconfig - Board documentation - MAINTAINERS entry Changes in v2: - Removed unused configs from `lckfb-tspi-rk3566_defconfig` - Reordered TaishanPi entry in `doc/board/rockchip/rockchip.rst` alphabetically Link to v1: https://lore.kernel.org/u-boot/tencent_95ED0C0545D87B6A8C4B62EC045D53AD2406@qq.com/ Signed-off-by: Jiehui He Reviewed-by: Kever Yang

board: rockchip: add Xunlong Orange Pi 5 Max

2025-05-08T03:47:06Z

The 5 Max is another board in the Orange Pi 5 family. It's overall similar to the 5 Plus, but in a smaller form factor, which leads to some I/O being reshuffled, but nothing relevant to u-boot. So, just reuse the config for the 5 Plus and adjust the DT names. Reviewed-by: Jonas Karlman Signed-off-by: Ilya Katsnelson Reviewed-by: Kever Yang

imx95_evk: add i.MX95 19x19 EVK board basic support

2025-05-03T19:55:32Z

This patch adds i.MX95 19x19 EVK board basic support. Messaging unit for EdgeLock Secure Enclave, messaging unit for System Manager, uSDHC for SD Card, gpio, lpuart are supported now. Signed-off-by: Ye Li Signed-off-by: Alice Guo Reviewed-by: Peng Fan

Merge patch series "board: beagle: beagley-ai: Cleanups and stdboot"

2025-05-02T21:32:45Z

Nishanth Menon says: Just happened to get a BeagleY-AI at desk and happened to test master branch (7dd49a9264a6 drivers: scsi: Add 'erase' support), noticed a few issues which were rather easy to solve.. so, here we go: Link: https://lore.kernel.org/r/20250425173120.141503-1-nm@ti.com