Signed-off-by: Tom Rini <trini@konsulko.com>

Signed-off-by: Tom Rini <trini@konsulko.com>

* format according to Sphinx style
* add link to Linux Kconfig documentation
* sort table alphabetically in 'Conversion from boards.cfg to Kconfig'

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>

Ilias Apalodimas <ilias.apalodimas@linaro.org> says:

Hi all,

This is a respin of [1] adding https support to wget. In short

patch#1 enables the crypto algorithms we need in mbedTLS
patches#2, #3 enable anf fix the lwIP part we need
patch#4 is adding https:// parsing support in our wget
patch#5 is making https:// the default for QEMU lwip defconfig so
people can easily test
and finaly patch#6 updates our documentation

[1] https://lore.kernel.org/u-boot/20241024112449.1362319-1-ilias.apalodimas@linaro.org/

Link: https://lore.kernel.org/r/20241110083017.367565-1-ilias.apalodimas@linaro.org

We now can use a combination og lwIP & mbedTLS and download from
https://. Describe the config options needed to enable it as well
as some limitations

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>

Signed-off-by: Tom Rini <trini@konsulko.com>

Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.

Signed-off-by: Simon Glass <sjg@chromium.org>

Signed-off-by: Tom Rini <trini@konsulko.com>

Patrick Rudolph <patrick.rudolph@9elements.com> says:

Based on the existing work done by Simon Glass this series adds
support for booting aarch64 devices using ACPI only.
As first target QEMU SBSA support is added, which relies on ACPI
only to boot an OS. As secondary target the Raspberry Pi4 was used,
which is broadly available and allows easy testing of the proposed
solution.

The series is split into ACPI cleanups and code movements, adding
Arm specific ACPI tables and finally SoC and mainboard related
changes to boot a Linux on the QEMU SBSA and RPi4. Currently only the
mandatory ACPI tables are supported, allowing to boot into Linux
without errors.

The QEMU SBSA support is feature complete and provides the same
functionality as the EDK2 implementation.

The changes were tested on real hardware as well on QEMU v9.0:

qemu-system-aarch64 -machine sbsa-ref -nographic -cpu cortex-a57 \
                    -pflash secure-world.rom \
                    -pflash unsecure-world.rom

qemu-system-aarch64 -machine raspi4b -kernel u-boot.bin -cpu cortex-a72 \
-smp 4 -m 2G -drive file=raspbian.img,format=raw,index=0 \
-dtb bcm2711-rpi-4-b.dtb -nographic

Tested against FWTS V24.03.00.

Known issues:
- The QEMU rpi4 support is currently limited as it doesn't emulate PCI,
  USB or ethernet devices!
- The SMP bringup doesn't work on RPi4, but works in QEMU (Possibly
  cache related).
- PCI on RPI4 isn't working on real hardware since the pcie_brcmstb
  Linux kernel module doesn't support ACPI yet.

Link: https://lore.kernel.org/r/20241023132116.970117-1-patrick.rudolph@9elements.com