u-boot.git/doc/device-tree-bindings/leds, branch master Unnamed repository; edit this file 'description' to name the repository. doc: dt-bindings: remove duplicates with dts/upstream 2025-12-03T17:03:45+00:00 Quentin Schulz quentin.schulz@cherry.de 2025-11-12T17:48:09+00:00 b0f39c085dc8f99becd7b2a83d43958c5e6fa936 doc/device-tree-bindings/leds/leds-bcm6328.txt can be found at dts/upstream/Bindings/leds/leds-bcm6328.yaml. doc/device-tree-bindings/leds/leds-bcm6358.txt can be found at dts/upstream/Bindings/leds/leds-bcm6358.txt. doc/device-tree-bindings/leds/leds-gpio.txt can be found at dts/upstream/Bindings/leds/leds-gpio.yaml. doc/device-tree-bindings/leds/leds-lp5562.txt can be found at dts/upstream/Bindings/leds/leds-lp55xx.yaml. Only two LED dt-bindings are left in U-Boot: leds-bcm6858.txt and leds-pwm.txt. The former is partially supported by dts/upstream/Bindings/leds/leds-bcm63138.yaml but is lacking all optional properties we have listed in "downstream" dt-binding in U-Boot. However, there doesn't seem to exist any user of that compatible. The latter is partially supported by dts/upstream/Bindings/leds/leds-pwm.yaml but is missing the u-boot,default-brightness property, which is used by arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi at the moment. The default-brightness property is probably not what we want here as it defaults to max-brightness if missing. I'm assuming we want a different value for U-Boot (127) and the kernel (255 via max-brightness as a default), which would prevent us from upstreaming this property, which doesn't change the status quo, so let it be for now. Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> 
doc/device-tree-bindings/leds/leds-bcm6328.txt can be found at
dts/upstream/Bindings/leds/leds-bcm6328.yaml.

doc/device-tree-bindings/leds/leds-bcm6358.txt can be found at
dts/upstream/Bindings/leds/leds-bcm6358.txt.

doc/device-tree-bindings/leds/leds-gpio.txt can be found at
dts/upstream/Bindings/leds/leds-gpio.yaml.

doc/device-tree-bindings/leds/leds-lp5562.txt can be found at
dts/upstream/Bindings/leds/leds-lp55xx.yaml.

Only two LED dt-bindings are left in U-Boot: leds-bcm6858.txt and
leds-pwm.txt. The former is partially supported by
dts/upstream/Bindings/leds/leds-bcm63138.yaml but is lacking all
optional properties we have listed in "downstream" dt-binding in U-Boot.
However, there doesn't seem to exist any user of that compatible.
The latter is partially supported by
dts/upstream/Bindings/leds/leds-pwm.yaml but is missing the
u-boot,default-brightness property, which is used by
arch/arm/dts/rk3326-odroid-go2-u-boot.dtsi at the moment. The
default-brightness property is probably not what we want here as it
defaults to max-brightness if missing. I'm assuming we want a different
value for U-Boot (127) and the kernel (255 via max-brightness as a
default), which would prevent us from upstreaming this property, which
doesn't change the status quo, so let it be for now.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
doc: remove redundant leds bindings 2025-02-07T16:53:39+00:00 Heiko Schocher hs@denx.de 2025-01-28T13:52:45+00:00 167bc2cd69f50a5fad6f4f95c5c4d969ea0d80c1 remove file doc/device-tree-bindings/leds/common.txt as we have this now already in dts/upstream/include/dt-bindings/leds/common.h which is imported from linux. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> 
remove file doc/device-tree-bindings/leds/common.txt
as we have this now already in
dts/upstream/include/dt-bindings/leds/common.h
which is imported from linux.

Signed-off-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
led: add TI LP5562 LED driver 2023-12-13T16:35:16+00:00 Doug Zobel douglas.zobel@climate.com 2023-11-17T11:38:11+00:00 f9dc67d18ee258d08fa620248d97e206b1cb849f Driver for the TI LP5562 4 channel LED controller. Supports independent on/off control of all 4 channels. Supports LED_BLINK on 3 independent channels: blue/green/red. The white channel can blink, but shares the blue channel blink rate. Heavily based on patch originally from Doug Zobel [1]. I have modified it so it matches the DT bindings in the linux tree, and also follows the linux driver implementation more closely. This should address Tom's concerns, and also matches my goal of making the U-Boot driver work with our existing .dts which is known to work in linux. As our boards only have the R,G,B outputs connected, I have not actually tested how the white channel behaves, but the R,G,B work exactly as expected. [1] https://lore.kernel.org/u-boot/1547150757-1561-1-git-send-email-douglas.zobel@climate.com/ Cc: Doug Zobel <douglas.zobel@climate.com> Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> 
Driver for the TI LP5562 4 channel LED controller. Supports
independent on/off control of all 4 channels. Supports LED_BLINK on 3
independent channels: blue/green/red. The white channel can blink, but
shares the blue channel blink rate.

Heavily based on patch originally from Doug Zobel [1].

I have modified it so it matches the DT bindings in the linux tree,
and also follows the linux driver implementation more closely. This
should address Tom's concerns, and also matches my goal of making the
U-Boot driver work with our existing .dts which is known to work in
linux.

As our boards only have the R,G,B outputs connected, I have not
actually tested how the white channel behaves, but the R,G,B work
exactly as expected.

[1] https://lore.kernel.org/u-boot/1547150757-1561-1-git-send-email-douglas.zobel@climate.com/

Cc: Doug Zobel <douglas.zobel@climate.com>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
led: led_pwm: Add a driver for LEDs connected to PWM 2022-04-11T15:39:19+00:00 Ivan Vozvakhov i.vozvakhov@corp.mail.ru 2022-03-12T10:03:14+00:00 067cfc1c2ea382b0820d995f476e2a26713a3200 Add a driver which allows to use of LEDs connected to PWM (Linux compatible). MAINTAINERS: add i.vozvakhov as a maintainer of leds-pwm C(required during new functionality adding). Signed-off-by: Ivan Vozvakhov <i.vozvakhov@corp.mail.ru> 
Add a driver which allows to use of LEDs connected
to PWM (Linux compatible).
MAINTAINERS: add i.vozvakhov as a maintainer of leds-pwm
C(required during new functionality adding).

Signed-off-by: Ivan Vozvakhov <i.vozvakhov@corp.mail.ru>
led: add initial support for bcm6858 2019-04-22T22:13:24+00:00 Philippe Reynes philippe.reynes@softathome.com 2019-03-22T16:02:01+00:00 d00c6a2d5634eeb58d15746fce8ddc4cfc76eaee The driver add the support of the led IP on bcm6858. This led IP can drive up to 32 leds, and can handle blinking. Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> 
The driver add the support of the led IP on bcm6858.
This led IP can drive up to 32 leds, and can handle
blinking.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
dm: led: add BCM6358 led driver 2017-05-10T14:16:09+00:00 Álvaro Fernández Rojas noltari@gmail.com 2017-05-07T18:11:30+00:00 632889cfe5205b68b2d0fc597011adb051bd938b This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
This driver is a simplified version of linux/drivers/leds/leds-bcm6358.c

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: led: add BCM6328 led driver 2017-05-10T14:16:09+00:00 Álvaro Fernández Rojas noltari@gmail.com 2017-05-07T18:10:24+00:00 28300dc5263b26365d8210b92d8acf097dc5e942 This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c, simplified to remove HW leds and blink fallbacks. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> 
This driver is a simplified version of linux/drivers/leds/leds-bcm6328.c,
simplified to remove HW leds and blink fallbacks.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
dm: led: Add a driver for GPIO-controlled LEDs 2015-07-21T23:39:24+00:00 Simon Glass sjg@chromium.org 2015-06-23T21:38:46+00:00 5ac76bad2277ed40f2a2112ffab0f156e3b599fb Add a simple driver which allows use of LEDs attached to GPIOs. The linux device tree binding is used. Signed-off-by: Simon Glass <sjg@chromium.org> 
Add a simple driver which allows use of LEDs attached to GPIOs. The linux
device tree binding is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
dm: Add support for LEDs 2015-07-21T23:39:24+00:00 Simon Glass sjg@chromium.org 2015-06-23T21:38:45+00:00 5917112c9e9f7a60062c604b3224bd5713c41f46 Add a simple uclass for LEDs, so that these can be controlled by the device tree and activated when needed. LEDs are referred to by their label. This implementation requires a driver for each type of LED (e.g GPIO, I2C). Signed-off-by: Simon Glass <sjg@chromium.org> 
Add a simple uclass for LEDs, so that these can be controlled by the device
tree and activated when needed. LEDs are referred to by their label.

This implementation requires a driver for each type of LED (e.g GPIO, I2C).

Signed-off-by: Simon Glass <sjg@chromium.org>