u-boot.git/doc/device-tree-bindings/net, branch next

doc: bindings: fix aquantia-phy.txt typo

2025-10-22T09:16:10+00:00

Fix typo: "weays" -> "ways"

Signed-off-by: Beiyan Yun

dm: doc: Update device tree binding docs for new schema

2023-02-14T16:43:27+00:00

Now that Linux has accepted these tags, move U-Boot over to use them.

Signed-off-by: Simon Glass

phy: adin: add driver for Analog Devices ADIN1300 PHY

2022-04-10T05:44:13+00:00

The current implementation configures RGMII using device tree phy-mode
property and then calls genphy_config

adin_config_rgmii_mode is derived from:
https://github.com/varigit/linux-imx/blob/lf-5.10.y_var04/drivers/net/phy/adin.c#L218-L262

Signed-off-by: Nate Drude 
Reviewed-by: Ramon Fried

WS cleanup: remove SPACE(s) followed by TAB

2021-09-30T13:08:16+00:00

Signed-off-by: Wolfgang Denk

WS cleanup: remove trailing empty lines

2021-09-30T12:08:56+00:00

Signed-off-by: Wolfgang Denk

net: replace the "xfi" phy-mode with "10gbase-r"

2021-09-28T15:50:56+00:00

As part of the effort of making U-Boot work with the same device tree as
Linux, there is an issue with the "xfi" phy-mode. To be precise, in
Linux there was a discussion (for those who have time to read:
https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/)

which led to a patch:
https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881

TL;DR: "xfi" was standardized in Linux as "10gbase-r".

This patch changes the relevant occurrences in U-Boot to use "10gbase-r"
instead of "xfi" wherever applicable.

Signed-off-by: Vladimir Oltean 
Reviewed-by: Ramon Fried

dt-bindings: net: Update Freescale TSEC to support "queue-group"

2021-04-15T08:52:17+00:00

At present the Freescale TSEC node DT bindings doc requires a 
property in the TSEC node. But this might not always be the case.
In the upstream Linux kernel, there is no DT bindings doc for it
but the kernel driver tests a subnode of a name prefixed with
"queue-group", as we can see from gfar_of_init():

  for_each_available_child_of_node(np, child) {
      if (!of_node_name_eq(child, "queue-group"))
  ...

in drivers/net/ethernet/freescale/gianfar.c

Update our DT bindings to describe this alternate description.

Signed-off-by: Bin Meng 
Reviewed-by: Ramon Fried 
Reviewed-by: Vladimir Oltean 
Reviewed-by: Priyanka Jain

dt-bindings: net: Add the old DT bindings for "fixed-link"

2021-04-15T08:52:17+00:00

Per the upstream Linux kernel doc:

  Documentation/devicetree/bindings/net/ethernet-controller.yaml

There are two ways to describe a fixed PHY attached to an Ethernet
device. This updates our dt-bindings doc to add the old DT bindings.

Signed-off-by: Bin Meng 
Reviewed-by: Ramon Fried 
Reviewed-by: Vladimir Oltean 
Reviewed-by: Priyanka Jain

net: tsec: Add the compatible string "gianfar" support

2020-09-24T12:27:44+00:00

Add compatible string "gianfar" support and update the
device-tree-bindings doc.

Signed-off-by: Hou Zhiqiang 
Reviewed-by: Vladimir Oltean 
Reviewed-by: Priyanka Jain

phy: atheros: Fix the "qca,clk-out-frequency" example

2020-06-23T18:43:23+00:00

The correct name for the property is "qca,clk-out-frequency", so fix
it accordingly.

Signed-off-by: Fabio Estevam 
Reviewed-by: Michael Walle