<feed xmlns='http://www.w3.org/2005/Atom'>
<title>u-boot.git/doc/device-tree-bindings/net, branch v2016.11</title>
<subtitle>Unnamed repository; edit this file 'description' to name the repository.
</subtitle>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/'/>
<entry>
<title>dt: net: add DWC EQoS binding</title>
<updated>2016-11-07T17:28:15+00:00</updated>
<author>
<name>Stephen Warren</name>
<email>swarren@nvidia.com</email>
</author>
<published>2016-10-21T20:46:46+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=afb970f78ab94282610cb4a3855af4111ce4858e'/>
<id>afb970f78ab94282610cb4a3855af4111ce4858e</id>
<content type='text'>
The Synopsys DWC EQoS is a configurable Ethernet MAC/DMA IP block which
supports multiple options for bus type, clocking and reset structure, and
feature list.

This patch imports the binding from the Linux kernel, including my V3
patch to extend the binding to cover the Tegra186, which is applied for
next-20160912. So far, my changes have been acked by Lars Persson, the
original author of the binding.

Signed-off-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The Synopsys DWC EQoS is a configurable Ethernet MAC/DMA IP block which
supports multiple options for bus type, clocking and reset structure, and
feature list.

This patch imports the binding from the Linux kernel, including my V3
patch to extend the binding to cover the Tegra186, which is applied for
next-20160912. So far, my changes have been acked by Lars Persson, the
original author of the binding.

Signed-off-by: Stephen Warren &lt;swarren@nvidia.com&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: dp83867: Add device tree bindings and documentation</title>
<updated>2016-05-24T16:42:04+00:00</updated>
<author>
<name>Dan Murphy</name>
<email>dmurphy@ti.com</email>
</author>
<published>2016-05-02T20:45:58+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=c7ba7bdc9d9940313ff5a63644ae3d74c77636cc'/>
<id>c7ba7bdc9d9940313ff5a63644ae3d74c77636cc</id>
<content type='text'>
Add the device tree bindings and the accompanying documentation
for the TI DP83867 Giga bit ethernet phy driver.

The original document was from:
    [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux kernel]

Signed-off-by: Dan Murphy &lt;dmurphy@ti.com&gt;
Reviewed-by: Mugunthan V N &lt;mugunthanvnm@ti.com&gt;
Tested-by: Mugunthan V N &lt;mugunthanvnm@ti.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add the device tree bindings and the accompanying documentation
for the TI DP83867 Giga bit ethernet phy driver.

The original document was from:
    [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux kernel]

Signed-off-by: Dan Murphy &lt;dmurphy@ti.com&gt;
Reviewed-by: Mugunthan V N &lt;mugunthanvnm@ti.com&gt;
Tested-by: Mugunthan V N &lt;mugunthanvnm@ti.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: phy: micrel: add documentation for Micrel KSZ90x1 binding</title>
<updated>2016-01-28T19:20:29+00:00</updated>
<author>
<name>Dinh Nguyen</name>
<email>dinguyen@opensource.altera.com</email>
</author>
<published>2016-01-27T21:45:59+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=c16e69f702b171473d46825db7e663fd27d141b4'/>
<id>c16e69f702b171473d46825db7e663fd27d141b4</id>
<content type='text'>
Add the DTS documentation for the Micrel KSZ90x1 binding.

The original document was from:
[commit 4b405efbe12de28b26289282b431323d73992381 from the Linux kernel]

This takes the original document and adds a clarification on how the skew
values are represented in the code.

References:

Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf

Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf

Signed-off-by: Dinh Nguyen &lt;dinguyen@opensource.altera.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add the DTS documentation for the Micrel KSZ90x1 binding.

The original document was from:
[commit 4b405efbe12de28b26289282b431323d73992381 from the Linux kernel]

This takes the original document and adds a clarification on how the skew
values are represented in the code.

References:

Micrel ksz9021rl/rn Data Sheet, Revision 1.2. Dated 2/13/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/ksz9021rl-rn_ds.pdf

Micrel ksz9031rnx Data Sheet, Revision 2.1. Dated 11/20/2014.
http://www.micrel.com/_PDF/Ethernet/datasheets/KSZ9031RNX.pdf

Signed-off-by: Dinh Nguyen &lt;dinguyen@opensource.altera.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: tsec: Use priv-&gt;tbiaddr to initialize TBI PHY address</title>
<updated>2016-01-28T18:23:19+00:00</updated>
<author>
<name>Bin Meng</name>
<email>bmeng.cn@gmail.com</email>
</author>
<published>2016-01-12T06:41:25+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=a1c76c150831168c09810006ede95b164fa292df'/>
<id>a1c76c150831168c09810006ede95b164fa292df</id>
<content type='text'>
Add a new member 'tbiaddr' to tsec_private struct. For non-DM driver,
it is initialized as CONFIG_SYS_TBIPA_VALUE, but for DM driver, we
can get this from device tree. Update the bindings doc as well.

Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Add a new member 'tbiaddr' to tsec_private struct. For non-DM driver,
it is initialized as CONFIG_SYS_TBIPA_VALUE, but for DM driver, we
can get this from device tree. Update the bindings doc as well.

Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>doc: dt-bindings: Describe Freescale TSEC ethernet controller</title>
<updated>2016-01-28T18:23:10+00:00</updated>
<author>
<name>Bin Meng</name>
<email>bmeng.cn@gmail.com</email>
</author>
<published>2016-01-12T06:41:23+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=69a00875e3db178cfcb19ea8ab97c8927a11e593'/>
<id>69a00875e3db178cfcb19ea8ab97c8927a11e593</id>
<content type='text'>
Adapted from the same file name in the kernel device tree bindings
documentation, to use with U-Boot.

Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Adapted from the same file name in the kernel device tree bindings
documentation, to use with U-Boot.

Signed-off-by: Bin Meng &lt;bmeng.cn@gmail.com&gt;
Acked-by: Joe Hershberger &lt;joe.hershberger@ni.com&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>net: convert altera_tse to driver model and phylib</title>
<updated>2015-10-23T06:55:48+00:00</updated>
<author>
<name>Thomas Chou</name>
<email>thomas@wytron.com.tw</email>
</author>
<published>2015-10-22T07:29:11+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=96fa1e4385bb1b63c58c48d10b552605f47a6f7f'/>
<id>96fa1e4385bb1b63c58c48d10b552605f47a6f7f</id>
<content type='text'>
Convert altera_tse to driver model and phylib.

Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Reviewed-by: Marek Vasut &lt;marex@denx.de&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Convert altera_tse to driver model and phylib.

Signed-off-by: Thomas Chou &lt;thomas@wytron.com.tw&gt;
Reviewed-by: Marek Vasut &lt;marex@denx.de&gt;
Reviewed-by: Simon Glass &lt;sjg@chromium.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>dts: sunxi: Bring in Ethernet device tree bindings</title>
<updated>2015-04-18T17:11:36+00:00</updated>
<author>
<name>Simon Glass</name>
<email>sjg@chromium.org</email>
</author>
<published>2015-04-05T22:07:35+00:00</published>
<link rel='alternate' type='text/html' href='http://cgit.235523.xyz/u-boot.git/commit/?id=7b9cf8403136e8aa229009050bc4f7ef0f6fdf2e'/>
<id>7b9cf8403136e8aa229009050bc4f7ef0f6fdf2e</id>
<content type='text'>
Since we will use these bindings on sunxi, bring them in from Linux
4.0-rc1.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Ian Campbell &lt;ijc@hellion.org.uk&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Since we will use these bindings on sunxi, bring them in from Linux
4.0-rc1.

Signed-off-by: Simon Glass &lt;sjg@chromium.org&gt;
Acked-by: Ian Campbell &lt;ijc@hellion.org.uk&gt;
</pre>
</div>
</content>
</entry>
</feed>
