u-boot.git/doc/device-tree-bindings/net, branch v2022.07

phy: adin: add driver for Analog Devices ADIN1300 PHY

2022-04-10T05:44:13Z

The current implementation configures RGMII using device tree phy-mode property and then calls genphy_config adin_config_rgmii_mode is derived from: https://github.com/varigit/linux-imx/blob/lf-5.10.y_var04/drivers/net/phy/adin.c#L218-L262 Signed-off-by: Nate Drude Reviewed-by: Ramon Fried

WS cleanup: remove SPACE(s) followed by TAB

2021-09-30T13:08:16Z

Signed-off-by: Wolfgang Denk

WS cleanup: remove trailing empty lines

2021-09-30T12:08:56Z

Signed-off-by: Wolfgang Denk

net: replace the "xfi" phy-mode with "10gbase-r"

2021-09-28T15:50:56Z

As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean Reviewed-by: Ramon Fried

dt-bindings: net: Update Freescale TSEC to support "queue-group"

2021-04-15T08:52:17Z

At present the Freescale TSEC node DT bindings doc requires a property in the TSEC node. But this might not always be the case. In the upstream Linux kernel, there is no DT bindings doc for it but the kernel driver tests a subnode of a name prefixed with "queue-group", as we can see from gfar_of_init(): for_each_available_child_of_node(np, child) { if (!of_node_name_eq(child, "queue-group")) ... in drivers/net/ethernet/freescale/gianfar.c Update our DT bindings to describe this alternate description. Signed-off-by: Bin Meng Reviewed-by: Ramon Fried Reviewed-by: Vladimir Oltean Reviewed-by: Priyanka Jain

dt-bindings: net: Add the old DT bindings for "fixed-link"

2021-04-15T08:52:17Z

Per the upstream Linux kernel doc: Documentation/devicetree/bindings/net/ethernet-controller.yaml There are two ways to describe a fixed PHY attached to an Ethernet device. This updates our dt-bindings doc to add the old DT bindings. Signed-off-by: Bin Meng Reviewed-by: Ramon Fried Reviewed-by: Vladimir Oltean Reviewed-by: Priyanka Jain

net: tsec: Add the compatible string "gianfar" support

2020-09-24T12:27:44Z

Add compatible string "gianfar" support and update the device-tree-bindings doc. Signed-off-by: Hou Zhiqiang Reviewed-by: Vladimir Oltean Reviewed-by: Priyanka Jain

phy: atheros: Fix the "qca,clk-out-frequency" example

2020-06-23T18:43:23Z

The correct name for the property is "qca,clk-out-frequency", so fix it accordingly. Signed-off-by: Fabio Estevam Reviewed-by: Michael Walle

doc: dt-bindings: tsec: Correct the Ethernet port compatible string

2020-06-04T13:23:20Z

Change the compatible string to "fsl,etsec2" for the Ethernet ports, which is used in the current driver's match table. Fixes: 69a00875e3db ("doc: dt-bindings: Describe Freescale TSEC ethernet controller") Signed-off-by: Hou Zhiqiang Acked-by: Vladimir Oltean Reviewed-by: Priyanka Jain

phy: atheros: add device tree bindings and config

2020-05-07T15:05:00Z

Add support for configuring the CLK_25M pin as well as the RGMII I/O voltage by the device tree. By default the AT803x PHYs outputs the 25MHz clock of the XTAL input. But this output can also be changed by software to other frequencies. This commit introduces a generic way to configure this output. Also the PHY supports different RGMII I/O voltages: 1.5V, 1.8V and 2.5V. An internal LDO is able to provide 1.5V (default) and 1.8V. The 2.5V option needs an external supply voltage. This commit adds support to switch the internal LDO to 1.8V. Signed-off-by: Michael Walle Acked-by: Joe Hershberger