u-boot.git/doc/device-tree-bindings/soc, branch v2024.04

dt-bindings: soc: samsung: Add Exynos PMU

2024-01-24T02:23:20Z

Add bindings documentation for Exynos PMU hardware block. It was taken from Linux kernel [1], but minimized and modified to reflect features that will be actually supported in U-Boot soon. For example, the "samsung,uart-debug-1" property is not available in Linux kernel bindings and only present in U-Boot. [1] Documentation/devicetree/bindings/soc/samsung/exynos-pmu.yaml Signed-off-by: Sam Protsenko Signed-off-by: Minkyu Kang

dt-bindings: soc: samsung: Add Exynos USI

2024-01-24T02:23:20Z

Add USI bindings documentation and header file. Those are taken from Linux kernel [1,2], but the documentation was reworked a bit to only describe the compatibles that will be supported in U-Boot soon. [1] Documentation/devicetree/bindings/soc/samsung/exynos-usi.yaml [2] include/dt-bindings/soc/samsung,exynos-usi.h Signed-off-by: Sam Protsenko Signed-off-by: Minkyu Kang

net, qe: add DM support for QE UEC ethernet

2020-09-17T04:09:53Z

add DM/DTS support for the UEC ethernet on QUICC Engine Block. Signed-off-by: Heiko Schocher Patch-cc: Mario Six Patch-cc: Qiang Zhao Patch-cc: Holger Brunck Patch-cc: Madalin Bucur Series-changes: 3 - revert: commit "3374264df97b" ("drivers: net: qe: deselect QE when DM_ETH is enabled") as now qe works with DM and DM_ETH support. - fix mailaddress from Holger Series-changes: 2 - add comments from Qiang Zhao: - add device node documentation - I did not drop the dm_qe_uec_phy.c and use drivers/net/fsl_mdio.c because using drivers/net/fsl_mdio.c leads in none existent udevice mdio@3320 instead boards with DM ETH support should use now this driver. - remove RFC tag Commit-notes: - I let the old none DM based implementation in code so boards should work with old implementation. This Code should be removed if all boards are converted to DM/DTS. - add the DM based qe uec driver under drivers/net/qe - Therefore copied the files uccf.c uccf.h uec.h from drivers/qe. So there are a lot of Codingstyle problems currently. I fix them in next version if this RFC patch is OK or it needs some changes. - The dm based driver code is now under drivers/net/qe/dm_qe_uec.c Used a lot of functions from drivers/qe/uec.c - seperated the PHY specific code into seperate file drivers/net/qe/dm_qe_uec_phy.c END