u-boot.git/doc/device-tree-bindings, branch v2018.05

dm: i2c: dts: Add gpios and pinctrl device tree properties

2018-04-11T09:34:17+00:00

The commit describe usage of gpios and pinctrl device tree
properties in order to enable gpio-based software deblocking.

Signed-off-by: Alexander Kochetkov

doc: a37xx: Introduce pinctrl device tree binding

2018-03-30T10:52:48+00:00

Reviewed-on: http://vgitil04.il.marvell.com:8080/43289
Tested-by: iSoC Platform CI 
Reviewed-by: Kostya Porotchkin 
Reviewed-by: Igal Liberman 
Cc: Simon Glass 
Cc: Stefan Roese 
Signed-off-by: Ken Ma 
Signed-off-by: Stefan Roese

clk: stm32mp1: add clock tree initialization

2018-03-19T20:14:22+00:00

add binding and code for clock tree initialization from device tree

Signed-off-by: Patrick Delaunay

ram: stm32mp1: add driver

2018-03-19T20:14:21+00:00

Add driver and binding for stm32mp1 ddr controller and phy

Signed-off-by: Patrick Delaunay

dts: cadence_spi: Update documentation for DT bindings

2018-01-24T06:37:50+00:00

Update documentation to reflect adopting the Linux DT bindings.

Tested on TI K2G platform:
Tested-by: Vignesh R 

Tested on a socfpga-cyclonev board:
Tested-by: Simon Goldschmidt 

Signed-off-by: Jason Rush 
Reviewed-by: Jagan Teki 
Acked-by: Simon Goldschmidt 
Acked-by: Marek Vasut

doc: bindings: soft-spi: update documentation to match the code

2018-01-10T06:36:15+00:00

Linux bindings have been introduced in the code (removing the U-Boot
specific ones) without documentation update. Compatible string has
changed, as well as the four GPIO properties. Reflect this by updating
the soft-spi.txt documentation.

Fixes: 102412c415 ("dm: spi: soft_spi: switch to use linux compatible string")
Signed-off-by: Miquel Raynal 
Reviewed-by: Jagan Teki

power: extend prefix match to regulator-name property

2017-12-13T02:53:45+00:00

This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.

Signed-off-by: Felix Brack 
Reviewed-by: Simon Glass

ARC: clk: introduce HSDK CGU clock driver

2017-12-11T08:36:23+00:00

Synopsys HSDK clock controller generates and supplies clocks to various
controllers and peripherals within the SoC.

Each clock has assigned identifier and client device tree nodes can use
this identifier to specify the clock which they consume. All available
clocks are defined as preprocessor macros in the
dt-bindings/clock/snps,hsdk-cgu.h header and can be used in device
tree sources.

Signed-off-by: Eugeniy Paltsev 
Signed-off-by: Alexey Brodkin

rockchip: rk3399-puma: add code to allow forcing a power-on reset

2017-11-30T21:59:54+00:00

The reset circuitry in the RK3399 only resets 'almost all logic' when
a software reset is performed.  To make our software maintenance
easier in the future, we want to have the option (controlled by a DTS
property) to force all reset causes other than a power-on reset to
trigger a power-on reset via a GPIO trigger.

This adds the necessary support to the rk3399-puma (i.e. RK3399-Q7)
board-support and the documentation for the new property
(sysreset-gpio) within the /config-node.

Signed-off-by: Philipp Tomsich 
Tested-by: Klaus Goger 
Reviewed-by: Simon Glass

dt-bindings: spi: Add andestech atcspi200 spi binding doc

2017-11-30T01:45:29+00:00

Add a document to describe Andestech atcspi200 spi and
binding information.

Signed-off-by: Rick Chen